This page shows textual changes in the document between the two versions indicated in the dates above. Textual matter removed in the later version is indicated with red strikethrough and textual matter added in the later version is indicated with blue.
The standing rules of the Senate promote deliberation by permitting Senators to debate most questions at length and by precluding a simple majority from ending debate when theysupporters are prepared to vote to approve a billon a bill or other legislative question. This right of extended debate permits filibusters that, which can be brought to an end if the Senate invokes cloture, usually by a vote of three-fifths of all Senators, typically 60. Even then, consideration can typically continue under cloture for an additional 30 hours. Theas many as 30 additional hours. This possibility of filibusters encourages the Senate to seek consensus whenever possible and to conduct business under the terms of unanimous consent agreements that limit the time available for debate and amending.
Except when the Senate has invoked cloture or is considering appropriations, budget, and certain other measures, Senators also may propose floor amendments that are not germane to the subject or purpose of the bill being debated. This permits individual Senators to raise issues and potentially have the Senate vote on them, even if they have not been studied and evaluated by the relevant standing committees.
These characteristics of Senate rules make the Senate's daily floor schedule potentially unpredictable unless all Senators agree by unanimous consent to accept limits on their right to debate and offer non-germane amendments to a bill. Also to promote predictability and order, Senators traditionally have agreed to give certain procedural privileges to the majority leader. The majority leader enjoys priority in being recognized to speak, and only the majority leader (or a Senator acting at his behest) is able to successfully propose what bills and resolutions the Senate should consider.
structure any amending process.
Traditionally, to promote predictability and order, Senators also have granted certain procedural privileges to the majority leader. The majority leader enjoys priority in being recognized to speak and is generally the only Senator (other than one acting at his behest) able to successfully propose what bills and resolutions the Senate should consider. However, the scheduling of legislative business on the floor typically requires either successful unanimous consent negotiations, or instead, the successful use of a cloture process (and its associated super-majority vote threshold).
The legislative process on the Senate floor is governed by a set of standing rules, a body of precedents created by rulings of presiding officers or by votes of the Senate, a variety of established and customary practices, and ad hoc arrangements that the Senate makes to meet specific parliamentary and political circumstances. A knowledge of the Senate's formal rules is not sufficient to understand Senate procedures, and Senate practices cannot be understood without knowing the rules to which the practices relate.
The essential characteristic of the Senate's rules, and the characteristic that most clearly distinguishes its procedures from those of the House of Representatives, is their emphasis on the rights and prerogatives of individual Senators. Like any legislative institution, the Senate is both a deliberative and a decision-making body; its procedures must embody some balance between the opportunity to deliberate or debate and the need to decide. The Senate's rules give greater weight to the value of full and free deliberation than they give to the value of expeditious decisions.
Put differently, legislative rules also must strike ain governing deliberations and decisionmaking, the rules of a legislative body always embody some balance between minority rights and majority prerogatives. The Senate's standing rules place greater emphasis on the rights of individual Senators—and, therefore, of minorities within the Senate—than on the powers of the majority. The Senate's legislative agenda and its policy decisions are influenced not merely by the preferences of its Members but also by the intensity of their preferences.
Precisely because of the nature of its standing rulesa majority. Precisely because of this emphasis, the Senate cannot rely exclusively on its ruleson them exclusively. If all Senators took full advantage of their rights under the rules whenever it might be in their immediate interests, the Senate would have great difficulty reaching timely decisions.
Therefore, the Senate has developed a variety of practices by which Senators set aside some of their prerogatives under the rules to expedite the conduct of its business or to accommodate the needs and interests of its Memberswhile accommodating Senators' needs and interests. Some of these practices have become well-established by precedent; others are arranged to suit the particular circumstances the Senate confronts from day to day and from issue to issue. In most cases, these alternative arrangements require the unanimous consent of the Senate—the explicit or implicit concurrence of each of the 100 Senators. The Senate relies on unanimous consent agreements every day for many purposes—purposes great and small, important and routine. However, Senators can protect their rights under Senate rules simply by objecting to a unanimous consent request to waive one or more of the rules.
Generally, the Senate can act more efficiently and expeditiously when its MembersSenators agree by unanimous consent to operate outside of its standing rules. Generally also, SenatorsSenators may insist that the rules be enforced strictly only when the questions before them are divisive and controversial. Compromise, but compromise and accommodation normallycommonly prevail. Senators frequently exercise self-restraint by not taking full advantage of their rights and opportunities under the standing rules, and often by agreeing to unanimous consent requests for arrangements that may not promote their immediate individual legislative interests. The standing rules remain available, however, for Senators to invoke when, in their judgment, the costs of compromise and accommodation become too great.
Thus, the legislative procedures on the Senate floor reflect a balance—and sometimes an uneasy balance—between the operation of its rules and the principles they embody, on the one hand, and pragmatic arrangements to expedite the conduct of business, on the other. The interplay between the principles of the Senate's standing rules and the pragmatism of its daily practices will be a theme running throughout the following sections of this report.
The standing rule that is probably most pivotal for shaping what does and does not occur on the Senate floor is paragraph 1(a) of Rule XIX, which governs debate:
(Note that Senate procedures in relation to executive business—that is, nominations and treaties—are not covered in any detail in this report.)
The Right to Debate
Paragraph 1(a) of Rule XIX, which governs debate, is arguably the most consequential standing rule shaping what does and does not occur on the Senate floor:
The presiding officer of the Senate (unlike the Speaker of the House) may nothas no authority to use the power to recognize only certain Senators in order to control the flow of business. If no Senator holds the floor, any Senator seeking recognition has a right to be recognized. Moreover, once a Senator who has been recognized, he or she may make any motion that Senate rules permit, including motions affecting what bills the Senate will consider (though a Senator loses the floor when he or she makesafter making a motion, offersoffering an amendment, or takestaking one of many other actions).
In practice, however, the Senate has modified the effect of this rule by precedent and custom. By precedent, the majority and minority leaders are recognized first if the leader and another Senator are seeking recognition at the same time, the majority leader (or, next, the minority leader) is recognized first. In addition, by custom, only the majority leader (or another Senator acting at his behest) typically makes the motions or requests affectingthat affect when the Senate will meet and what legislation it will consider.
In these respects, Senators routinely relinquish their equal right to recognition and their right to make certain motions, and they do so in order to lend some order and predictability to the Senate's proceedings. Otherwise, it would be nearly impossible for any Senator to predict with assurance when the Senate will be in session and what legislation it will consider. For example, during debate on one bill, any Senator could move that the Senate turn to another bill instead. This would make it very difficult for the Senate to conduct its business in an orderly fashion, and it would be equally difficult for Senators to plan their own schedules with any confidence. Thus, Senate precedents and practices modify the operation of this rule, as it affects recognition, in the interests of the Senate as an institution and in the interests of its Members individually.
Even more important is what paragraph 1(a) of Rule XIX says and does not say about the length of debate. The rule imposes a limit of two speeches per Senator per question per legislative day (though Senators rarely insist on imposing this limit on their colleagues). Beyond this restriction, it imposes no limit at all on the number of Senators who may make those two speeches or on the length of the speeches. In fact, there are few Senate rules that limit the right to debate, and no rules that permit a simple majority of the Senate to end a debate whenever it is ready to vote for a bill, amendment, or most other legislative questions being considered. When Senators are recognized by the presiding officer, the rules normally permit them to speak for as long as they wish, and questions generally cannot be put to a vote so long as there are Senators who still wish to make the speeches they are permitted to make under Rule XIX.
The House of Representatives may bring a question to a vote if a simple majority agrees to a motion to order the previous question. When meeting in Committee of the Whole, a majority of Representatives also can move to close debate on a pending amendment or sometimes on a bill and all amendments to it. No such motions are possible in the Senate. As a result, a numerical majority of Senators doesdo not have nearly the same control over the pace and timing of their legislative deliberations as does a majority of the House.
Filibusters and Cloture
deliberations as does a majority of the House.
There is one partial exception to this generalization. The Senate often disposes of an amendment by agreeing to a motion to lay the amendment on the table. When a Senator who has been recognized makes this motion, it cannot be debated (except by unanimous consent, of course). If the Senate agrees to this motion to table, the amendment is rejected; to table is to kill. On the other hand, if the Senate defeats the motion, debate on the amendment may resume; the Senate only has determined that it is not prepared at that time to reject the amendment. Thus, a tabling motion can be used by a simple majority to stop debate even if there still are Senators wishing to speak, but only by defeating the amendment at issue. Although the effect of the motion is essentially negative, it frequently is a test vote on Senate support for an amendment. If the motion fails, the Senate may agree to the amendment shortly thereafter. But this is a reflection of political reality, not a requirement of Senate rules or precedents.
The dearth of debate limitations in Senate rules creates the possibility of filibusters. Individual Senators or minority groups of Senators who adamantly oppose a bill or amendment may speak against it at great length (or threaten to), in the hope of changing their colleagues' minds, winning support for amendments that address their objections, or convincing the Senate to withdraw the bill or amendment from further consideration on the floor (or indeed, to forgo floor consideration entirely). Opposing Senators also can delay final floor action by offering numerous amendments and motions, by demanding roll call votes on amendments and motions, and by usingtaking a variety of other devices.
actions.
The only formal procedureprocess that Senate rules provide for breaking filibusters is to invoke cloture under the provisions of Rule XXII, paragraph 2 (commonly called the "cloture rule"). Under the rulesrule, however, once cloture is proposedfiled on a pending question, the cloture vote cannot occur until after a further period of time (typically two days of Senate session); further, a simple majority of the Senate is insufficient to invoke cloture (except in very limited circumstances).
Cloture on legislative questions.
Cloture on most questions requires the support of three-fifths of the Senators duly chosen and sworn, orthat is, a minimum of 60 votes if there is no more than one vacancy. For this reason alone, cloture can be difficult to invoke and, in the modern context, requires some bipartisan support. (If the matter being considered changes the standing rules, cloture requires a vote of two-thirds of the Senators present and voting. Pursuant to precedents set in 2013 and 2017, cloture can be invoked by a simple majority on any nomination.) For this reason alone, cloture can be difficult to invoke and almost always requires some bipartisan support. In addition, some Senators are reluctant to vote for cloture, even if they support the legislation being jeopardized by the filibuster, precisely because the right of extended debate is such an integral element of Senate history and procedure.
Even if the Senate does invoke cloture on, for example, a bill, the result is not an immediate vote on passing the bill. The cloture rule permits a maximum of 30 additional hours for considering the bill, during which each Senator may speak for one hour. (On a limited number of motions, Rule XXII does not permit additional consideration after cloture has been invoked; in those cases, the Senate proceeds to an immediate vote on the motion in question. In addition, pursuant to an April 3, 2019, precedent, post-cloture consideration of most nominations is limited to two hours.) The time consumed by rollcall votes and quorum calls is deducted from the 30-hour total; as a result, each. Each Senator does not have an opportunity to speak for a full hour, although he or sheeach Senator is guaranteed at least 10 minutes for debate. Thus, cloture does not typically stop debatestop consideration immediately; it only ensures that debateconsideration cannot continue indefinitely. Even the additional 30 hours allowed on a bill under cloture is quite a long time for the Senate to devote to any one bill, especially since Senators may not be willing to invoke cloture until the bill already has been debated at considerable length.
.
Any Senator can filibuster almost any legislative proposal that the Senate is considering. The only bills that cannot be filibustered are the relatively few whichcertain specific types of measures that are considered under provisions of law that limit the time available for debating them. For example, Section 305(b)(1) of the Budget Act of 1974 restricts debate on a budget resolution, "and all amendments thereto and debatable motions and appeals in connection therewith," to not more than 50 hours. If(Other examples of statues that provide for some limit on debate or consideration of certain measures include the Congressional Review Act, the National Emergencies Act, and the War Powers Resolution.) In situations where no such provision applies, Senators can prolongprevent a vote by prolonging the debate indefinitely on any bill or amendment (or nomination or treaty), as well as on many motions, subject only to tabling motions or to a successful cloture process.
Although there may be many matters to which some Senators may be adamantly opposed, filibusters are not daily events. One reason is that conducting a filibuster may be physically demanding (at least if it is not supported by a number of other Senators), but there are more compelling reasons for self-restraint. If Senators filibustered every bill they opposed, the Senate as an institution would suffer. It could not meet its constitutional responsibilities in a timely fashion and it could not respond effectively to pressing national needs. Public support for the Senate as an institution, and for its Members as individuals, would be undermined. Furthermore, all Senators have legislation they want to promote. They appreciate that if they used the filibuster regularly against bills they oppose, other Senators would be likely to do the same, and every Senator's legislative objectives would be jeopardized. In short, Senators typically have resorted to filibusters only on matters of pronounced significance to them because this practice serves the long-term interests of the Senate and all Senators alike.
Nonetheless, the right to debate at length remains, and the possibility of filibusters affects much of what happens on the Senate floor. Many of the ways in which the Senate agrees to set aside its standing rules are designed in response to the possibility of filibusters. Simply threatening to filibuster can give Senators great influence over whether the Senate considers a bill, when it considers it, and how it may be amended.
If a majority of Senators support a bill that is being filibustered, they may be able to pass it eventually if they are committed and patient enough—and especially if they are able to invoke cloture. Even if cloture is not invoked, devices such as late-night sessions may strain the endurance and determination of a filibustering Senator (though, in most circumstances, the burden imposed by such sessions is borne more by those supporting an end to debate, and in any case, requires the use of considerable floor time). The potency of filibusters does not depend, however, solely on Senators' ability to prolong the debate indefinitely. From the right to debate flows the ability to delay, and the prospect of delay alone can often be sufficient to influence the Senate's agenda and decisions.
The legislative process is laborious and time-consuming, and the time available for Senate floor action each year is limited. Every day devoted to one bill is a day denied for consideration of other legislation, and there are not enough days to act on all the bills that Senators and Senate committees wish to see enacted. Naturally, the time pressures become even greater with the approach of deadlines such as the date for adjournment and the end of the fiscal year. So, for all but the most important bills, even the threat of a filibuster can provide significant leverage to Senators. Before a bill reaches the floor or while it is being debated, its supporters often seek ways to accommodate the concerns of opponents, preferring an amended bill that can be passed without protracted debate to the time, effort, and risks involved in confronting a filibuster or the threat of one.
The possibility of filibusters affects much of what happens on the Senate floor. Many of the ways in which the Senate agrees to set aside its standing rules are designed in response to the possibility of filibusters. Simply threatening to filibuster can give Senators great influence over whether the Senate considers a bill, when it considers it, and how it may be amended. The legislative process is laborious and time-consuming, and the time available for Senate floor action each year is limited. Every day devoted to one bill is a day denied for consideration of other legislation, and there are not enough days to act on all the bills that Senators and Senate committees wish to see enacted. Naturally, the time pressures become even greater with the approach of deadlines such as the date for adjournment or the end of the fiscal year. So, the threat of a filibuster can provide significant leverage to Senators for even the most consequential bills and potentially prevent any consideration of legislation narrower in scope. Before a bill reaches the floor or while it is being debated, its supporters often seek ways to accommodate the concerns of opponents, preferring an amended bill that can be passed without protracted debate to the time, effort, and risks involved in confronting a filibuster or the threat of one. The right of extended debate, and the time required for a cloture process, encourages Senate committee and party leaders to bring up bills and approve them by unanimous consent whenever possible. Senate approval of bills and resolutions by unanimous consent is an action that does not involve a vote. Instead, when a Senator proposes a unanimous consent agreement on the floor, the Senate's presiding officer asks if anyone objects. If, at that moment, no Senator states, "I object," the action occurs. Because the unanimous consent process for approving legislation is so common, the Senate has developed informal methods for negotiating agreement among all Senators. Both the majority and minority party cloakrooms operate a group alert system consisting primarily of email messages. This communication system is colloquially known as the "hotline." Many refer to the process of seeking unanimous consent for floor consideration of a bill as "hotlining." The hotline process itself does not cause any formal action to occur on the bill. If a bill has cleared the hotline—meaning no Senator has indicated to either cloakroom that they would object—the Senate must still take up and approve the bill on the floor. This step is usually completed in mere minutes, as the terms of the unanimous consent request are spoken aloud on the floor followed by the presiding officer noting the absence of an objection raised at that time. Senators prefer to expedite the conduct of legislative business whenever possible, and so routinely cooperate in reaching such agreements to approve legislation by unanimous consent. If Senators withhold their consent, they are implicitly threatening extended debate on the bill. Senators may do so because they oppose that bill, because they are intent on offering amendments or guaranteeing themselves time for debate, or because they wish to delay consideration of one measure in the hope of influencing the fate of some other, possibly unrelated, measure. Any Senator who is dissatisfied with hotlined legislation, or the terms for its approval by unanimous consent, has only to signal disapproval. Such communications from Senators to leadership that they would object to approval of a bill by unanimous consent are often referred to as "holds." So long as any one Senator objects to the proposed agreement, the standing rules—and their provisions for taking up and approving legislation—remain in force with all the rights and opportunities they provide to each Senator. One way in which the possibility of extended debate affects the Senate's procedures is in how the Senate determines its legislative agenda—the order in which it decides to consider bills and other business on the floor. When a Senate standing committee reports a bill back to the Senate for a successful cloture process.
The Senate gives its majority leader the primary responsibility for proposing the order in which bills on the calendar should come to the floor for action. The majority leader's right to preferential recognition already has been mentioned, as has Senators' general willingness to relinquish to himthe floor leader the right to make the motion (provided for in the standing rules) for deciding the order of legislative business—namely, the motion that the Senate proceed to the consideration of a particular bill.
Whenever possible, however, bills reach the Senate floor not by motion but by unanimous consent. Under the Senate
The bill in question is only brought to the floor if the Senate agrees to the motion to proceed (MTP). Under the Senate's standing rules, the motion to proceed to a bill usually is debatablehas no debate limit, and, therefore, is subject to a filibuster. In other words, even before the bill can reach the floor, there couldsubject to a filibuster. (The question of proceeding to certain matters—for example, to a conference report or to executive session to take up and consider a nomination on the calendar—is not, however, subject to a filibuster, though the matter itself is.) Even before the bill can reach the floor (and perhaps face a filibuster), there may be extended debate on the question of whether the Senate should even consider the bill at all.
To avoid this possibility, the majority leader attempts to get all Senators to agree by unanimous consent to take up the bill he wishes to have debated. If Senators withhold their consent, they are implicitly threatening extended debate on the question of considering the bill. Senators may do so because they oppose that bill or because they wish to delay consideration of one measure in the hope of influencing the fate of some other, possibly unrelated, measure. Senators can even place a "hold" on a bill, by which they ask their party's floor leader to object on their behalf to any unanimous consent request to consider the bill, at least until they have been consulted. The practice of holds is not recognized in Senate standing rules or precedents (though both a provision in public law and a recently adopted Senate standing order govern their use); more often than not, however, the majority leader will not even make such a unanimous consent request if there is a hold on a bill.
In attempting to devise a schedule for the Senate floor, the majority leader seeks to promote the legislative program of his party (and perhaps the President) as he also tries to ensure that the Senate considers necessary legislation in a timely fashion.
Therefore, when the majority leader proposes that the Senate proceed to consider legislation, the leader also almost always immediately files cloture on that motion to proceed. This cloture motion asks the Senate to bring debate to a close on the question of taking up the bill. As discussed previously, the vote on cloture will occur two days of session later and requires the support of three-fifths of the Senate—that is, 60 Senators if there is no more than one vacancy. If successful, cloture will limit further consideration of the motion to proceed to the bill to a maximum of 30 additional hours.When the majority leader is confronted with two bills, one of which can be brought up by unanimous consent and the other of which cannot, he is naturally inclined to ask the Senate to take up the bill that can be considered without objection. Time is limited, and the majority leader is concerned to use that time with reasonable efficiency. Some bills, of course, are too important to be delayed only because some Senators object to considering them. Most are not, however, especially if the objections can be met through negotiation and compromise. be extended debate on the question of whether the Senate should even consider the bill at all. (Note that the question of proceeding to certain matters—for example, to a conference report, or to executive session to take up and consider a nomination on the Executive Calendar, or to a House amendment—is not debatable, and thus not subject to a filibuster, though final disposition of the matter itself is.)
to which some Senators objectbefore there is bipartisan support for cloture on the motion to proceed, and by encouraging negotiations over substantive changes in the bills in order to meet these objections.
The right of Senators to debate at length is not the only way in which they can influence the Senate's legislative agenda. The standing rules of the Senate give its Members at least two other opportunities to influence the matters that reach the Senate floor for debate and decision. One opportunity affects the prerogatives of Senate committees; the other affects the amendments that Senators may propose on the floor.
build that bipartisan coalition.
Committee Referral and the Rule XIV Route to the Calendar
The motion to proceed can only be directed toward legislation that is on the Senate's Calendar of Business, and most legislation is placed on the calendar as a result of being reported by committee. The Senate's standing committees play an essential part in the legislative process, as they. Committees select the small percentage of the bills introduced each Congress that, in their judgment, deserve the attention of the Senate as a whole, and as theythey often recommend amendments to these bills based on their expert knowledge and experience. Most bills are routinely referred to the committee with appropriate jurisdiction as soon as they are introduced (or received from the House). However, paragraph 4 of Rule XIV permits a Senator to bypass a committee referral and have the bill placed directly on the Calendar of Business, with exactly the same formal status the bill would have if it had been considered and reported by a Senate committee.
By the same token, if a committee fails to act on a bill that was referred to it, while this may mean the bill will die for lack of action, the proposal it embodies(s) embodied may not. The Senator sponsoringsponsor of the bill may introduce a new bill with exactly the samesimilar provisions as the first, and have the secondoriginal proposal, and then have the new bill placed directly on the calendar under the Rule XIV process. However, taking the bill off the calendar and considering it on the floor (via unanimous consent or a motion to proceed) remains a question the Senate expects the majority leader to propose; thus, a Senator who uses Rule XIV to bypass a committee is not in a position to ensure the bill's movement to the floor. In recent practice, the majority leader moremost frequently uses this Rule XIV method to put a measure directly on the calendar—often to expedite consideration of a complicated or high-profile bill that has been drafted outside of the committee process or in relation to a legislative vehicle that closely resembles another bill already considered in committee (or by multiple committees).
An even more important opportunity for individual Senators is a result of the absence in the standing rules of any general requirement that the amendments offered by Senators on the floor must be germane or relevant to the bill being considered. The rules impose a germaneness requirement only on amendments to general appropriations and budget measures and to matters being considered under cloture; various statutes impose such a requirement on a limited number of other bills. (The Senate generally interprets germaneness strictly, to preclude amendments that expand the scope of a bill or introduce a specific additional topic.) In all other cases, Senators may propose whatever amendments they choose on whatever subjects to whatever bill the Senate is considering.
The right to offer non-germane amendments is extraordinarily important because it permits Senators to present issues to the Senate for debate and decision, without regard to the judgments of the Senate's committees or the scheduling decisions and preferences of its majority leader. Again consider the position of a Senator whose bill is not being acted on by the committee to which it was referred. Instead of introducing an identical bill and having it placed directly on the calendar, he or she may have a second and typically more attractive option: to offer the text of the bill as a floor amendment to another bill that has reached the floor and that can serve as a useful legislative "vehicle."
The possibility of this opportunity can make it extremely difficult to anticipate what will happen to a bill when it reaches the floor and how much of the Senate's time it will consume. The party leaders and the bill's floor managers (typically, the chair and ranking minority Member of the committee with jurisdiction over the bill) may know what amendments on the subject of the bill are likely to be offered, but they cannot be certain that Senators will not want to also offer non-germane (and often quite controversial) amendments. In fact, it is not unusual for one or more non-germane amendments to occupy more of the Senate's attention than the subject the bill itself addresses.
Just as the right of extended debate encourages Senate committee and party leaders to bring up bills for consideration by unanimous consent, the right to debate combined with the right to offer non-germane amendments encourages the same leaders to seek unanimous consent agreements limiting or foreclosing the exercise of these rights while a bill is being considered. Without such an agreement (or in the absence of a successful cloture process), the bill could be debated for as long as Senators wish—as could each amendment offered, whether germane or not, unless the Senate votes to table it. These are the essential conditions under which the Senate considers a bill if it adheres to its standing rules.
It is precisely to avoid these conditions that the Senate often debates, amends, and passes bills under very different sets of parliamentary ground rules—ground rules that are far more restrictive, but that can be imposed only by unanimous consent. One of the frequent purposes of these unanimous consent agreements is to limit the time available for debate, and thereby ensure that there will be no filibuster. Complex unanimous consent agreements of this special kind are sometimes called "time agreements."
In addition, before taking up a bill, or after the Senate has begun debating it, Senators often reach unanimous consent agreements to govern consideration of individual amendments that have been or will be offered. Less often today, the Senate reaches an encompassing agreement, limiting debate on a bill and all amendments to it, before or at the time the bill is called up for floor action.
The following example illustrates several contemporary features of such a comprehensive unanimous consent agreement:
Ordered, That on Tuesday, July 29, 2014, upon the confirmation of the Polaschik nomination, the Senate proceed to the consideration of H.R. 5021, an Act to provide an extension of Federal-aid highway, highway safety, motor carrier safety, transit, and other programs funded out of the Highway Trust Fund, and for other purposes; provided, that the only amendments in order to the bill be the following: Wyden Amdt. No. 3582; Carper-Corker-Boxer Amdt. No. 3583; Lee Amdt. No. 3584; and Toomey Amdt. No. 3585; provided further, that there be one hour of debate, equally divided between the proponents and opponents of each amendment and up to two hours of general debate on the bill, equally divided between the two Leaders, or their designees.
Ordered further, That upon the use of yielding back of time, the Senate vote in relation to the amendments in the order listed; provided, that no second degree amendments be in order to any of the amendments prior to the votes; provided, that no motions to commit be in order; provided further, that upon disposition of the Toomey amendment, the bill, as amended, if amended, be read a third time and the Senate vote on passage of the bill, as amended, if amended; further, that the vote on each amendment and the vote on passage of the bill be subject to a 60 affirmative vote threshold; provided further, that the Secretary be authorized to make technical changes to amendments if necessary to allow for proper page and line number alignment.
Ordered further, That if the Senate passes H.R. 5021, the Senate proceed to the consideration of H.Con.Res. 108, providing for the correction of the enrollment of H.R. 5012; provided, that the concurrent resolution be agreed to and the motion to reconsider be laid upon the table with no intervening action or debate. (July 23, 28, 2014.)
The two essential features of this and comparable unanimous consent agreements are (1) a prohibition on any amendments not listed in the agreement, and (2) strict limitations on the time available for debating the bill and any questions that may arise during its consideration. Under the terms of this agreement, for example, the Senate as a whole may debate each amendment for no more than one hour. There is also a two-hour time limit for debate on the bill itself (that is, "general debate").
The differences between considering a bill under the terms of the Senate's standing rules and considering it under this kind of unanimous consent agreement are so great and so fundamental that they bear repeating. Under the standing rules, Senators may be able to offer whatever amendments, even if non-germane, that they want (as long as there are not already pending amendments that must first be disposed of); under this agreement, only specified amendments are in order. Under the standing rules, Senators may debate the bill, each amendment, and a variety of other questions for as long as they want, subject only to limits that would be imposed under a successful cloture process; under this agreement, on each question, time for debate is strictly limited. Under the standing rules, each amendment (and passage of the bill) would be subject to a simple-majority vote threshold; under this agreement, a super-majority vote is required (reflecting the understanding by Senators that opponents of these questions could require a super-majority to invoke cloture in order to reach a vote). The differences could hardly be more dramatic. It must be emphasized, however, that such agreements are unanimous consent agreements. They cannot be imposed on the Senate by any vote of the Senate; they require the concurrence or acquiescence of each and every Senator.
.
The Amending Process
The amending process is at the heart of the Senate's floor deliberations. If the Senate reaches a final vote on passage of a bill, the bill is very likely to pass. It is through the amending process that Senators have an opportunity to influence the content of the bill before the vote on final passage occurs; this is an especially important opportunity for Senators who do not serve on the committee that marked up the bill and reported it. After the majority leader has proposed that the Senate take up a bill, statements usually are made by the two floor managers—the chair and ranking minority member of the committee with jurisdiction over the bill—and often by other Senators as well. These statements lay the groundwork for the debate that follows, describing the purposes and provisions of the bill, the state of current law and the developments that make new legislation desirable or necessary, and any major points of controversy. The bill is open to amendment as soon as it is before the Senate (which, in modern practice, is usually after the Senate agrees to a motion to proceed on which a successful cloture process occurred). The first amendments to be considered are any recommended by the committee reporting the bill, as so designated in the printed version of the bill "as reported." In current practice, this committee amendment is usually a full-text substitute amendment (an "amendment in the nature of a substitute" [ANS]). It is also common that a party or committee leader offers, on the floor, an ANS at the outset of consideration. This may occur for a number of reasons. For example, it may happen when the Senate takes up a House bill. Such an amendment may also be offered to replace a committee-reported ANS with a new ANS that reflects more recent negotiations over a measure's text. (In some situations, this new ANS is called a "manager's amendment" or "managers' package"; it consists of the text from multiple individual Senators' amendments that the bill managers wrap into one proposed amendment.) As this committee amendment (or other ANS offered on the floor at the outset of consideration) is being debated, Senators may propose amendments to it and to the underlying bill. The Senate votes on any such amendments before it votes on the pending ANS amendment (potentially, as amended) itself. The order in which amendments are offered is typically specified by any unanimous consent agreements in force, not on requirements imposed by standing rules or precedents. As a general rule, a Senator cannot propose an amendment to a bill while first-degree (and possibly second-degree) amendments to the bill are pending. In general, however, when the Senate considers multiple amendments to a pending bill, the process is governed by unanimous consent agreements that tailor the process, often in ways that may differ from what Senate rules would provide. Senate standing rules do not impose a general requirement that amendments offered by Senators on the floor must be germane or relevant to the bill being considered. The rules impose a germaneness requirement only on amendments to general appropriations, to budget resolutions and reconciliation bills, and to matters being considered after cloture has been invoked on the bill (or on a pending ANS). Various statutes also impose such a requirement on a limited number of other bills. (The Senate generally interprets germaneness strictly, to preclude amendments that expand the scope of a bill or introduce a specific additional topic, for example.) In all other cases, the rules do not preclude Senators from proposing amendments to a bill under consideration by the Senate on whatever subjects they choose. This possibility can make it extremely difficult to anticipate what will happen to a bill when it reaches the floor and how much of the Senate's time it will consume. The party leaders and the bill's floor managers may know what amendments on the subject of the bill are likely to be offered, but they cannot be certain that Senators will not seek to also offer non-germane (and potentially controversial) amendments. In recent decades, majority leaders of the Senate have "filled the amendment tree"—that is, offered a series of amendments, one immediately after another, temporarily taking up available slots for pending amendments for the purpose of "freezing" the amendment process so that no other amendments can be offered (except by unanimous consent) at that time. This action prevents Senators from offering nongermane or controversial amendments while supporters of the bill negotiate an amending process by unanimous consent (and/or while a cloture process proceeds). Once the Senate takes up the bill, party and committee leaders often attempt to reach one or more agreements to process amendments and set a time for the Senate to vote on passage of the bill. staffsstaff take the initiative to protect their own interests by advising the leaders of their preferences and intentions. Negotiations sometimes take place on the floor and on the public record, but at least the preliminary discussions and consultations usually occur in meetings during quorum calls (discussed later) or off the floor. (The negotiation process may also be facilitated by use of the clearance process [or "hotline"], anaforementioned "hotline" clearance process, the informal communication mechanism by which each party's leadership gauges the preferences of its conference members.)
Senators prefer to expedite the conduct of legislative business whenever possible, and so normally cooperate in reaching time agreements. However, when Senators have special concerns—for instance, when they are intent on offering particular amendments or guaranteeing themselves ample time for debate—their interests must be accommodated. Any Senator who is dissatisfied with the terms of a proposed time agreement has only to object when it is propounded on the floor; so long as any one Senator objects, the standing rules remain in force with all the rights and opportunities they provide. As a result, time agreements may include exceptions to their general provisions in order to satisfy individual Senators. For example, a comprehensive agreement that generally limits debate on each first degree amendment to an hour and prohibits non-germane amendments may identify one or more specific amendments that are exempted from the germaneness requirement, and also may provide different amounts of time for debating them.
In these ways, time agreements can be less restrictive than the one quoted earlier. There may be no agreement at all if one or more Senators decide to fully preserve their rights to debate and offer amendments. On many other occasions, however, an agreement's provisions are even more restrictive—for example, all amendments to the bill may be prohibited except for a few that are identified specifically in the agreement itself. If the Senate does accept a unanimous consent agreement, whatever its terms, it may be modified at a later time only by unanimous consent.
In current practice, the Senate usually begins consideration of most bills without first having reached a time limitation agreement. In some cases, the floor managers expect few amendments and relatively little debate, making an elaborate agreement unnecessary. In other cases, the majority leader and committee chair cannot reach an agreement with all Senators, but proceed with the bill anyway because of its timeliness and importance. After the Senate has debated such a bill and controversial amendments for many hours or even days, the leaders often renew their attempts to reach an overall agreement limiting debate on each remaining amendment or setting a time for the Senate to vote on passage of the bill.
In the absence of a time agreement covering all amendments and other questions, the party leaders and the floor managers often try to arrange unanimous consent agreements for more limited purposes while the Senate is debating a bill. During consideration of a controversial amendment, a Senator may propose that the Senate agree—by unanimous consent—to limit any further debate on it. Senators also may agree to time limits on individual amendments before offering them. By unanimous consent, the Senate may set aside one amendment temporarily in order to consider another one that could not otherwise be offered at that time. Other agreements may define the order in which Senators will offer their amendments, postpone roll call votes until a later time that is more convenient for Senators, or even set a super-majority threshold for the adoption of a particular amendment.
These examples only begin to illustrate the many ways in which the Senate relies every day on unanimous consent arrangements. From routine requests to end a quorum call to extremely elaborate and complicated procedural "treaties," the Senate depends on unanimous consent requests and the willingness of Senators to agree to them.
Unanimous consent agreements may define the order in which Senators will offer their amendments, postpone roll call votes until a later time that is more convenient for Senators, or set a super-majority threshold for the adoption of a particular amendment or even for final passage of the bill. (Since the bill, and each amendment to it, could require a successful cloture process [and its associated supermajority vote threshold], setting a 60-vote threshold on such questions effectively reflects the requirements needed under Senate rules, while allowing the Senate to take votes more quickly than would occur under those rules.) The following example illustrates several contemporary features of such a unanimous consent agreement affecting the amendment process: Mr. SCHUMER. Mr. President, I ask unanimous consent that it be in order to call up the following amendments to S. 2226: Rubio, No. 523; Young, No. 230; Daines, No. 1084; further, that with respect to the amendments listed above, the Senate vote on the amendments in the order listed, with no further amendments or motions in order, and with 60 affirmative votes required for adoption and that there be 2 minutes equally divided prior to each vote; further, that upon disposition of the Daines amendment, that it be in order to send to the desk a managers' package of 47 amendments, and after the clerk reports it, I ask that the clerk also read the numbers and sponsors of each of the individual amendments in this package and that they be the only amendments remaining in order to be offered to S. 2226; that the Senate vote on the amendment with no intervening action or debate; that upon disposition of the managers' amendments, the cloture motions filed during Wednesday's session ripen and the Senate vote on the motion to invoke cloture on the substitute amendment No. 935, as amended; further, that if cloture is invoked, all postcloture time be considered expired, the Schumer amendment No. 936 be withdrawn, and the Senate vote on the substitute amendment, as amended, with no intervening action or debate; further, that if the substitute amendment is agreed to, the cloture motion with respect to the underlying bill, S. 2226, be withdrawn, the bill, as amended, be considered read a third time, and the Senate vote on passage of the bill, as amended, with 60 affirmative votes required for passage; that the motion to reconsider be considered made and laid upon the table, with up to 10 minutes for debate, equally divided, prior to the vote on passage; finally, that upon disposition of S. 2226, the Senate immediately proceed to the consideration of H.R. 2670, which was received from the House and is at the desk; that all after the enacting clause be stricken, the text of the Senate bill, as passed, be inserted; H.R. 2670, as amended, be considered read a third time and passed, the Senate bill then be indefinitely postponed, and the motion to reconsider be considered made and laid upon the table with no intervening action or debate. (Congressional Record, vol. 169, July 27, 2023, daily edition, pp. S3725-3726.) This unanimous consent agreement shares two essential features with others that are common in current practice. First, there is a prohibition on any amendments (or motions) not listed in the agreement. Second, the agreement specifies limitations on the time available for debating each amendment; the agreement then sets up actions that result in a final passage vote. In relation to time spent on the bill, the agreement effectively alters the amount of time the Senate, under the rules, could have spent using cloture. The amount of time the Senate would need to reach a vote under the requirements of the cloture process is a key component of negotiations over a bill's consideration, including amending. The pursuit of unanimous consent to shorten the cloture process represents a point of significant leverage for Senators during negotiations.willmay seek to offer) during consideration of each bill. In addition, the other proceedings that occur each day also depend on whether the Senate decides to operate under or outside of its rules.
The time at which the Senate convenes each day is set by a resolution the Senate adopts at the beginning of each Congress, but that time is oftenalmost always changed from day to day by unanimous consent—at the request of the majority leader—to suit changing circumstances. When the Senate does convene, and after the opening prayer and the Pledge of Allegiance, a brief period of "leader time" is set aside for the majority leader and for the minority leader, under a standing order also established at the beginning of the Congress. During this time, the two party leaders may discuss the legislative schedule as well as their views on policy issues, and they also may conduct non-controversial business by unanimous consent.
What happens thereafter depends on whether the Senate is beginning a new legislative day. A legislative day begins when the Senate convenes after an adjournmentagreeing to a motion to adjourn, and it continues until the next adjournment. When the Senate instead recesses at the end of a day, as it sometimesoccasionally does, a legislative day continues for two or moreinto the next calendar days. (day. Standing Rules VII and VIII prescribe what the Senate should do at the beginning of each new legislative day, and one of the reasons the Senate may recess from day to day is to set aside the requirements imposed by these rules.)
Under the two standing rules
If the Senate were to convene and proceed as contemplated by Rules VII and VIII, the first two hours of session on eacha new legislative day are calledwould be the "morning hour." They areThis is a period for conducting routine business at a predictable time each day that does not interfere with the consideration of major legislation. The morning hour beginsis to begin with the transaction of "morning business," which includes the introduction of bills and joint resolutions and the submission of Senate and concurrent resolutions and committee reports. During the remainder of the morning hour, the Senate cancould act on bills on the Calendar of Business. At the end of the morning hour, the Senate resumeswould resume consideration of the unfinished business—whatever bill, if any, was the pending business when the Senate adjourned.
In current practice, however, the Senate typically adjourns day to day, but, by unanimous consent, deems the morning hour to have expired upon reconvening; alternatively, occasionally the Senate recesses at the end of the day. In either case, there is no morning hour on the following day of session. Instead, the majority leader usuallyoften arranges, by unanimous consent, that "a period for transacting routine morning business" follow "leader time." Senators make brief statements on whatever subjects they like during this period, the length of which can change from day to day, depending on the legislative schedule. Also, by unanimous consent, there may be other periods for transacting morning business during the course of the day when time is available andfor Senators wish to speak on subjects unrelated to the pending bill.
After the morning hour or the period (set by unanimous consent) for transacting routine morning business, the Senate normally resumes consideration of the bill that is either the unfinished business (if the Senate had adjourned on the preceding day) or the pending business (if the Senate had recessed instead). However, this bill may be set aside—temporarily or indefinitely—in favor of other legislative or executive business if the Senate agrees to motions or unanimous consent requests made for that purpose by the majority leader (or his designee). Before the end of the day, the majority leader also makes arrangements for the following day—establishing a meeting time by unanimous consent and commenting on the expected legislative program.
The amending process is at the heart of the Senate's floor deliberations. If the Senate reaches a final vote on passing or defeating a bill, the bill is very likely to pass. It is through the amending process that Senators have an opportunity to influence the content of the bill before the vote on final passage occurs; this is an especially important opportunity for Senators who do not serve on the committee that marked up the bill and reported it.
When a bill is called up for floor consideration, opening statements usually are made by the two floor managers—the chair and ranking minority Member of the committee (or sometimes the subcommittee) with jurisdiction over the bill—and often by other Senators as well. These statements lay the groundwork for the debate that follows, describing the purposes and provisions of the bill, the state of current law and the developments that make new legislation desirable or necessary, and the major points of controversy. These opening statements are a matter of custom and practice, however; the bill is open to amendment as soon as it is before the Senate.
The first amendments to be considered are any recommended by the committee reporting the bill, and so designated in the printed version of the bill "as reported." As each committee amendment is being debated, Senators may propose amendments to it and to the part of the bill the committee amendment would change. The Senate votes on any such amendments before it votes on the committee amendment itself. Thereafter, Senators may offer amendments in any order to any part of the bill that has not already been amended. The order in which amendments are offered depends largely on the convenience of the Senators proposing them, not on requirements imposed by standing rules or precedents. As a general rule, a Senator cannot propose an amendment to a bill while first degree (and possibly second degree) amendments to the bill are pending. It is not unusual, however, for the Senate to agree by unanimous consent to lay aside pending amendments temporarily in order to consider another amendment that a Senator wishes to offer at that time.
After a Senator offers an amendment, it must be read unless the Senate dispenses with the reading by unanimous consent (or by non-debatable motion, in the case of certain amendments that have been previously available). The Senate then debates the amendment and may eventually dispose of it either by voting "up or down" on the amendment itself or by voting to table it. (In some cases, an amendment is disposed of when it falls on a successful point of order.) However, the amending process can become far more complicated. Bills are amendable in two degrees, so before the Senate votes on a first degree amendment, it is subject to second degree amendments that propose to change its text. After voting on any second degree amendments, the Senate votes on the first degree amendment as it may have been amended. Third degree amendments—amendments to second degree amendments—are not in order.
Additional complications are possible, depending on whether the first degree amendment proposes (1) to insert additional language in the bill without altering anything already in the bill; (2) to strike out language from the bill without inserting anything in its place; (3) to strike out language from the bill and insert different language instead; or (4) to strike out the entire text of the bill (everything after the enacting or resolving clause at the very beginning of the measure) and replace it with a different text. In the case of a motion to insert, for example, Senators can offer as many as three first and second degree amendments before the Senate would potentially face votes on any of them; in the case of an amendment that is a complete substitute for the text of the bill, Senators can propose six or more first and second degree amendments to the substitute and to the original text of the bill before any offered amendments could receive votes.
These possibilities depend on several principles of precedence among amendments—principles governing the amendments that may be offered while other amendments are pending and also governing the order in which the Senate votes on the amendments that have been offered. Complicated amendment situations do not arise very often, but they are most likely to occur when the policy and political stakes are high. Majority leaders of the Senate have sometimes offered a series of amendments, one immediately after another, taking up available slots for pending amendments for the purpose of "freezing" the amendment process so that no other amendments can be offered (except by unanimous consent) at that time.
Once a Senator has offered an amendment, the conditions for debating it depend on whether or not there is a time limitation for considering that particular amendment or all amendments to the bill (imposed either through a unanimous consent agreement, or via a successful cloture process). If there is no such limitation, each Senator typically may debate the amendment for as long as he or she pleases. However, any Senator who has been recognized may move to table the amendment, and that motion is not debatable. If there is a time limitation, the time provided is both a minimum and a maximum. Senators may not make motions or points of order, propose other amendments, or move to table, until all the time for debating the amendment has been used or until all remaining time has been yielded back. After the time has expired, on the other hand, the amendment can be debated further only by unanimous consent or if the Senators controlling time for debating the bill as a whole choose to yield part of that time.
A number of general principles govern the amending process. For example, an amendment that has been defeated may not be offered again without substantive change. An amendment should not make changes in two or more different places in the bill, nor may it propose only to amend a part of the bill that already has been amended. If an amendment consists of two or more parts that could each stand as separate and independent propositions, any Senator may demand that the amendment be divided and each division treated as if it were a separate amendment (except that a motion to strike out and insert is not divisible). Generally speaking, Senators may not propose amendments to their own amendments, but they can modify or withdraw their amendments instead. If the Senate takes some "action" on an amendment (such as ordering the yeas and nays on it), the Senator who offered the amendment loses his right to modify it, but now gains the right to offer an amendment to his or her own amendment.
As mentioned before, floor amendments to most bills need not be germane unless cloture has been invoked, or unless a germaneness requirement is part of the unanimous consent agreement under which a particular bill is being considered (or under a few other specific circumstances). Alternatively, the Senate may, by unanimous consent, require that amendments to a bill be relevant to it; relevancy is a somewhat less restrictive standard that seeks to ensure that unrelated issues will not be raised in the form of amendments.
The amending process continues until Senators have no other amendments they wish to offer, until the entire bill has been changed by amendments, or until the completion of a successful cloture process. At that point, the Senate orders the bill engrossed and read a third time—a formal stage that precludes further amendments—and then votes on final passage.
. Before the end of the day, the majority leader also makes arrangements for the following day—establishing a meeting time by unanimous consent and commenting on the expected legislative program. Quorum Calls and Rollcall Votes The Constitution requires that a quorum—that is, a majority of all Senators—be present to conduct business on the floor. Even though Senators have many responsibilities that frequently keep them from the floor, the Senate presumes that a quorum is present unless a quorum call demonstrates that it is not.
A Senator who has been recognized may suggest the absence of a quorum at almost any time; a clerk then begins to call the roll of Senators. Senators may not debate or conduct business while a quorum call is in progress. If a majority of Senators do not appear and respond to their names, the Senate can only adjourn or, recess, or attempt to secure the attendance of additional Senators. However, quorum calls usually are ended by unanimous consent before the clerk completes the call of the roll and the absence of a quorum is demonstrated. The reason is that most quorum calls are not really intended to determine whether a quorum is present.
The purpose of a quorum call usually is to suspend floor activity temporarily. If a Senator is coming to the floor to speak, a colleague may suggest the absence of a quorum until the expected Senator arrives. If the Senate finds itself confronted with unexpected procedural complications, if the majority leader needs to meet with several Senators on the floor about a possible unanimous consent agreement, or if the floor manager of a bill wants to discuss a compromise alternative to an amendment another Senator has offered—for any of these or many other reasons—a Senator may suggest the absence of a quorum to permit time for informal consultations. The time consumed by many of these quorum calls permits intensive and productive discussions that would be far more difficult to hold under the rules of formal Senate debate.
The Constitution also provides that one-fifth of the Senators on the floor (assuming that a quorum is present) can demand a rollcall vote. Sincecan demand a rollcall vote. Since the Senate assumes a quorum is present, and the smallest possible quorum is 51 Senators, the support of at least 11 Senators is required to order a rollcall vote. A Senator who has been recognized can ask for "the yeas and nays" at any time that the Senate is considering a motion, amendment, bill, or other question. Agreement to this request does not terminate debate or cause a vote to occur. Instead, if a rollcall is ordered pursuant to histhis request, then that is how the Senate will vote on the question when (or if) the time for the vote arrives. Thus, the Senate may order a rollcall vote on an amendment as soon as it is offered, but the vote itself may not take place for several hours or moreuntil much later (or, potentially, not at all), when Senators no longer wish to debate the amendment (or instead if a cloture process forces a vote).
The alternative to a rollcall vote usually is a voice vote in which the Senators favoring the bill or amendment (or whatever question is to be decided)in favor of the question vote "aye" in unison, followed by those opposed voting "no." (Sometimes in relation to a voice vote—when the outcome of the vote is not in question—the presiding officer will note that "without objection, the amendment ([or bill)] is agreed to.") Although a voice vote does not create a public record of how each Senator voted, it is an equally valid and conclusive way for the Senate to reach a decision.
The standing rules of the Senate are published periodically in a separate Senate document and in the Senate Manual, which contains other related documents as well. The most recent compilation of the Senate's precedents is Riddick's Senate Procedure, prepared by Floyd M. Riddick and Alan S. Frumin (Senate Document No. 101-28; 101st Congress, second session).
The parliamentarian, also available at https://riddick.gpo.gov/). Senators and their staff may access, via Webster (which is not available to the public), the Electronic Senate Precedents, a catalog of recent precedents compiled by the Office of the Parliamentarian. The Senate Manual also contains a section entitled "Select Legislative Procedures Enacted in Law Applying to the United States Senate."
The Parliamentarian and her assistants field inquiries from congressional offices about Senate procedures, and offer expert assistance compatible with their other responsibilities.
The Congressional Research Service has prepared numerous other reports on the Senate and its procedures, including CRS Report RL30788, Parliamentary Reference Sources: Senate, by Gail E. Baitinger; ;
CRS Report R43563, "Holds" in the Senate, by Mark J. Oleszek;
CRS Report RL30360, Filibusters and Cloture in the Senate, by Valerie Heitshusen and Richard S. Beth; ;
CRS Report 98-853, The Amending Process in the Senate, by Christopher M. Davis;
CRS Report 98-306, Points of Order, Rulings, and Appeals in the Senate, by Valerie Heitshusen;
CRS Report 96-452, Voting and Quorum Procedures in the Senate, coordinated by Elizabeth Rybicki,; and
CRS Report 98-696, Resolving Legislative Differences in Congress: Conference Committees and Amendments Between the Houses, by Elizabeth Rybicki. A large number of additional reports on specific topics related to Senate procedure are also available (categorized by subject area) at httphttps://www.crs.gov/iap/congressional-process-administration-and-electionslegislative-and-budget-process. Senate procedures in specific relation to executive business—that is, nominations and treaties—are not covered extensively in this report, but CRS has prepared additional reports on these topics, as well; for an overview, see CRS Report RL31980, Senate Consideration of Presidential Nominations: Committee and Floor Procedure, by Elizabeth Rybicki, and Michael Greene and CRS Report 98-384, Senate Consideration of Treaties, by Valerie Heitshusen.
CRS analysts with expertise in legislative procedure are available to consult with individual Senators and staff; they also present periodic staff seminars and institutes on legislative procedures.
Author Contact Information
Acknowledgments
This report was originally written by Stanley Bach, former Senior Specialist in the Legislative Process at CRS. The report has been revised and updated by the listed author, who is available to respond to congressional client inquiries on the subject.