.
The Buy American Act in Brief: Preferences
for “Domestic” Supplies and Construction
Materials in Federal Procurements
Kate M. Manuel
Legislative Attorney
July 9, 2013February 26, 2014
Congressional Research Service
7-5700
www.crs.gov
R43140
c11173008
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Summary
The Buy American Act of 1933 is the earliest and arguably the best known of various statutes
regarding federal procurement of domestic products. Essentially, the act attempts to protect U.S.
businesses and labor by restricting the acquisition and use of end products or construction
materials that are not “domestic.” For purposes of the act, domestic end products and domestic
construction materials include (1) unmanufactured end products or construction materials mined or
or produced in the United States, as well as (2) end products or construction materials
manufactured in
the United States, provided that (1a) the cost of the components mined, produced,
or manufactured
in the United States exceeds 50% of the cost of all components, or (2b) the
product is a
commercially available off-the-shelf item. Any endEnd products or construction materials
that do not
qualify as domestic under these definitions are generally treated as foreign, and offers
that supply
foreign end products or construction materials are foreign offers, regardless of the
offeror’s
nationality. Purchases of services are generally not subject to the Buy American Act.
As implemented, the Buy American Act limits the purchase of foreign end products and the use of
foreign construction materials by establishing price preferences for domestic offers. Specifically,
the provisions of the Federal Acquisition Regulation (FAR) implementing the Buy American Act
provide that, when a domestic offer is not the low offer, the procuring agency must add a certain
percentage of the low offer’s price to that offer before determining which offer is the lowest
priced or “best value” for the government. This percentage generally ranges from 6%, in cases
where the lowest domestic offer is from a large business; to 12%, when the lowest domestic offer
is from a small business; to 50%, for Department of Defense procurements, although agencies
may adopt higher percentages by regulation. If the domestic offer is the lowest, or tied for lowest,
after the application of this price preference, the agency must award the contract to the domestic
offeror. However, if the foreign offer still has the lowest price, the agency is generally to award
the generally awards the
contract to the foreign offeror pursuant to provisions of the Buy American Act permitting the
purchase of foreign end products (and the use of foreign construction materials) when the costs of
domestic ones are “unreasonable.”
There are also other “exceptions” to the Buy American Act, which would permit the purchase of
foreign foreign
end products and the use of foreign construction material if (1) the when (1) the expected value of the
procurement is below
the micro-purchase threshold (generally $3,000); (2) the goods are for use
outside the United
States; (3) the procurement of domestic goods or the use of domestic
construction materials
would be inconsistent with the public interest; (4) domestic end products
or construction
materials are unavailable; (5) the agency is procuring information technology that
is a
commercial item; or (6) the goods are acquired specifically for commissary resale.
In addition, the Buy American Act is sometimes waived, pursuant to the Trade Agreements Act.
When this happens, certain products that are wholly grown, produced, or manufactured in foreign
jurisdictions, or “substantially transformed” into new and different articles within foreign
jurisdictions, are treated the same as “domestic” ones for purposes of the procurement.
The Buy American Act is of perennial interest to Congress, which has periodically enacted or
considered measures to expand the scope of domestic preferences in federal procurements or,
more rarely, to narrow it. The act itself has seldom been amended. However, numerous statutory
requirements like those of the Buy American Act have been enacted. See archived CRS Report
R42501, R43354,
Domestic Content Legislation: The Buy American Act and Complementary Little Buy
American Provisions, by John R. Luckey. The act also interacts with various trade and other
international agreements, many of which can result in eligible products (i.e., products
substantially transformed in countries with which the United States has trade agreements) being
treated as if they were domestic in certain procurements, although other international agreements
establish preferences for U.S. goods for use outside the United States.
Congressional Research Service
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Congressional Research Service
.
Restrictions: The Buy American Act and Complementary Provisions of Federal
Law, by Kate M. Manuel et al.
Congressional Research Service
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Contents
Coverage of the Buy American Act ................................................................................................. 1
Purchases of Supplies ................................................................................................................ 3
Purchases of Construction Materials ......................................................................................... 65
Exceptions to the Buy American Act ............................................................................................... 6
Impracticable or Inconsistent with the Public Interest .............................................................. 7
Nonavailability .......................................................................................................................... 7
Unreasonable Cost ..................................................................................................................... 8
Resale ........................................................................................................................................ 8
Information Technology that Is a Commercial Item.................................................................. 98
Use Outside the United States ................................................................................................... 9
Purchases Below the Micro-Purchase Threshold ...................................................................... 9
Waiver Pursuant to the Trade Agreements Act ................................................................................ 9
Enforcement and Reporting ............................................................................................................. 9 10
Contacts
Author Contact Information........................................................................................................... 1112
Acknowledgments ......................................................................................................................... 1112
Congressional Research Service
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
T
he Buy American Act of 19331 is the earliest and arguably the best known of the various
statutes regarding federal procurement of domestic products. Essentially, the act attempts
to protect domestic businesses and labor by establishing a price preference for domestic
end products and construction materials in government acquisitions.2
The act is of perennial interest to Congress, which has periodically enacted or considered
measures to expand the scope of domestic preferences in federal procurements3 or, more rarely, to
narrow it.4 The act itself has seldom been amended.5 However, numerous statutory requirements
like those of the Buy American Act have been enacted. See generally archived CRS Report
R42501, R43354,
Domestic Content Legislation: The Buy American Act and Complementary Little Buy
American Provisions, by John R. Luckey. The act also interacts with various trade and other
international agreements, many of which can result in eligible products (i.e., products
substantially transformed in countries with which the United States has trade agreements) being
treated as if they were domestic in certain procurements,6 although other international agreements
establish preferences for U.S. goods for use outside the United States.7Restrictions: The Buy American Act and Complementary Provisions of Federal
Law, by Kate M. Manuel et al.
This report supersedes CRS Report 97-765, The Buy American Act: Requiring Government
Procurements to Come from Domestic Sources, by John R. Luckey.
Coverage of the Buy American Act
On its face, the Buy American Act appears to prohibit the acquisition8acquisition6 of foreign goods by federal
agencies by providing that
[o]nly unmanufactured articles, materials, and supplies that have been mined or produced in
the United States, and only manufactured articles, materials, and supplies that have been
manufactured in the United States substantially all from articles, materials, or supplies
mined, produced, or manufactured in the United States, shall be purchased for public use.7
1
Act of March 3, 1933, 47 Stat. 1520 (codified, as amended, at 41 U.S.C. §§8301-8305).
See generally Dana Frank, Buy American: The Untold Story of Economic Nationalism 56-57 (1998).
3
See, e.g., Ike Skelton National Defense Authorization Act for FY2011, P.L. 111-383, Div. A, title VIII, §846, 124
Stat. 4285 (Jan. 7, 2011) (requiring that, when contracts could result in the Department of Defense owning photovoltaic
devices purchased by third parties, these contracts must comply with the Buy American Act); American Recovery and
Reinvestment Act, P.L. 111-5, §1605, 123 Stat. 303 (Feb. 17, 2009) (providing that none of the funds appropriated or
made available by the act may be used for the construction, alteration, maintenance, or repair of a public building or
public work unless the iron, steel, and manufactured goods are produced in the United States).
4
See, e.g., Consolidated Appropriations Act, 2004, P.L. 108-199, §535, 118 Stat. 345 (Jan. 23, 2004) (“In order to
promote Government access to commercial information technology, the restriction on purchasing nondomestic articles,
materials, and supplies set forth in the Buy American Act ... shall not apply to the acquisition by the Federal
Government of information technology ... that is a commercial item.”).
5
See U.S. Troop Readiness, Veterans’ Care, Katrina Recovery, and Iraq Accountability Appropriations Act, 2007, P.L.
110-28, title VIII, §8306, 121 Stat. 211 (May 25, 2007) (reporting requirements); National Defense Authorization Act
for Fiscal Year 1997, P.L. 104-201, §827, 110 Stat. 2611 (Sept. 23, 1996) (reporting requirements); Federal Acquisition
Streamlining Act, P.L. 103-355, §4301, 108 Stat. 3346-47 (Oct. 13, 1994) (micro-purchases); Omnibus Trade and
Competitiveness Act, P.L. 100-418, §§7004-7005, 102 Stat. 1552 (Aug. 23, 1988) (temporary prohibition on
contracting with countries that discriminate against the United States in their procurement practices).
6
See generally 48 C.F.R. Subpart 25.4 (trade agreements).
7
See generally 48 C.F.R. Subpart 225.75 (providing policies and procedures for implementing the Balance of
Payments Program, which generally establishes a preference for the acquisition of domestic end products and
construction materials outside the United States).
8
Although the Buy American Act sometimes uses the word “purchase,” the act has been found to apply to leases of
goods on the grounds that “it would be unreasonable to presume that Congress intended to narrow the protection
afforded to American manufacturers by allowing the lease of foreign-made products where the purchase of such
products is prohibited.” Postmaster General, B-156082 (May 1, 1967).
2
Congressional Research Service
1
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
[o]nly unmanufactured articles, materials, and supplies that have been mined or produced in
the United States, and only manufactured articles, materials, and supplies that have been
manufactured in the United States substantially all from articles, materials, or supplies
mined, produced, or manufactured in the United States, shall be purchased for public use.97
41 U.S.C. §8302(a)(1). See also 41 U.S.C. §8303(a)(1)-(2) (“Every contract for the construction, alteration, or repair
of any public building or public work in the United States shall contain a provision that in the performance of the work
the contractor, subcontractors, material men, or suppliers shall use only (1) unmanufactured articles, materials, and
supplies that have been mined or produced in the United States.... ”).
2
Congressional Research Service
1
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
As implemented, however, the act is better understood as generally establishing a price preference
for domestic end products and construction materials.108 Specifically, the provisions of the Federal
Acquisition Regulation (FAR) implementing the Buy American Act require that, when a domestic
offer (i.e., an offer of a domestic end product) is not the low offer, the procuring agency must add
a certain percentage of the low offer’s price
Application of Buy American Act
(inclusive of duty) to that offer before
Price DifferentialsApplication of Buy American Act
determining which offer is the lowest priced or
Price Differentials
9
“best value” for the government.11 This
Imagine that a foreign bid of $500,000 is the low offer.
percentage typically ranges from 6%, in cases
The lowest domestic offer is $550,000, and is from a
percentage typically ranges from 6%, in caseswhere the lowest domestic offer is from a large
large business. Here, the foreign bid would still win
where the lowest domestic offer is from a largebusiness;10 to 12%, when the lowest domestic
since $500,000 + $30,000 (i.e., 6% of $500,000) is
12
business; to 12%, when the lowest domestic
$530,000, and $530,000 is less than $550,000.
13
offer is from a small business;11 to 50%, for
Department of Defense procurements,12 although to 50%, for
However, if the bids had been the same, and lowest
Department of Defense procurements,14 although domestic offer had come from a small business
agencies may adopt higher percentages by
offering the products of small businesses, the domestic
agencies may adopt higher percentages by
1513
regulation. If the domestic offer is the lowest,
offeror would win because $550,000 is less than
regulation. If the domestic offer is the lowest,
$560,000 (i.e., $500,000 + (.12 x $500,000)).
or tied for lowest, after the application of this
price preference, the agency must award the
contract to the domestic offeror. However, if the foreign offer still has the lowest price, the agency
is generally to awardgenerally awards the contract to the foreign offeror pursuant to provisions of the Buy
American American
Act permitting the purchase of foreign end products (and the use of foreign
construction construction
materials) when the costs of domestic ones are “unreasonable.”16
9
41 U.S.C. §8302(a)(1). See also 41 U.S.C. §8303(a)(1)-(2) (“Every contract for the construction, alteration, or repair
of any public building or public work in the United States shall contain a provision that in the performance of the work
the contractor, subcontractors, material men, or suppliers shall use only (1) unmanufactured articles, materials, and
supplies that have been mined or produced in the United States.... ”).
10
14
Determining the act’s applicability to specific procurements—and, particularly, determining
whether the act’s requirements were violated in particular cases—can raise complicated legal and
factual questions. Much depends upon how particular terms (e.g., end product, component) are
defined and construed for purposes of the Buy American Act. However, the details of
manufacturing processes are often also relevant. Acquisitions of services are generally not subject
8
Executive Order 10582, implementing the Buy American Act, authorizes agencies to reject foreign offers that would
have an “adverse effect” on the public interest. See, e.g., Prescribing Uniform Procedures for Certain Determinations
Under the Buy-American Act, 19 Fed. Reg. 8723 (Dec. 21, 1954) (“Nothing in this order shall affect the authority or
responsibility of an executive agency ... [t]o reject any bid or offer for reasons of the national interest not described or
referred to in this order ... ”). However, other than as authorized by this order, agencies generally cannot reject what
would otherwise be the low offer on the grounds that it is foreign. See Viking Supply Corp., B-150091 (Jan. 17, 1963).
119
48 C.F.R. §25.105. Which offer represents the “best value” for the government is determined based on various
factors factors
established by the government and incorporated into the solicitation for the contract. See 48 C.F.R. §15.101
(best
value); 48 C.F.R. §15.304 (evaluation factors). Cost or price must be among these factors, but it need not be the
primary factor or carry any specific weight in the overall award. 48 C.F.R. §15.304(c)(1). Other factors may include
contractors’ compliance with the solicitation requirements, technical excellence, management capability, personnel
qualifications, prior experience, and small-business status. 48 C.F.R. §15.304(c)(2).
1210
48 C.F.R. §25.105(b)(1).
1311
48 C.F.R. §25.105(b)(2). But see Puget Sound Pipe & Supply Co., B-164396 (Aug. 5, 1968) (finding that, although
the lowest domestic offer was from a small business, the 6% factor applied because the small business did not offer the
products of small businesses).
1412
48 C.F.R. §225.105 (“Use an evaluation factor of 50 percent instead of the factors specified in FAR 25.105(b).”).
1513
48 C.F.R. §25.105(a)(1). See also Concrete Tech., Inc., B-202407 (Oct. 27, 1981) (agencies may adopt higher
percentages by regulation); General Elec. Co., B-152470 (Feb. 14, 1964) (same).
1614
See, e.g., Yohar Supply Co., B-225480 (Feb. 11, 1987) (“[T]he Buy American Act ... does not prohibit the purchase
of foreign source end items.”); Paulsen-Webber Cordage Corp., B-140904 (Dec. 11, 1959) (upholding the purchase of
(continued...)
Congressional Research Service
2
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Determining the act’s applicability to specific procurements—and, particularly, determining
whether the act’s requirements were violated in particular cases—can raise complicated legal and
factual questions. Much depends upon how particular terms (e.g., end product, component) are
defined and construed for purposes of the Buy American Act. However, the details of
manufacturing processes are often also relevant. Acquisitions of services are generally not subject
to the Buy American Act.17foreign end products where the price of the domestic products was 36% higher than the price of the foreign ones).
Congressional Research Service
2
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
to the Buy American Act.15 Nor does the act restrict purchases from foreign persons so long as
their products are mined, produced, or manufactured in the United States, as required by the act.1816
Purchases of Supplies
Under the act, federal agencies procuring goods for use in the United States under a contract
valued in excess of the micro-purchase threshold (typically $3,000) may generally purchase
foreign (i.e., non-domestic) end products only in exceptional circumstances.1917 The FAR’s
definition of end product appears straightforward on its face: “End product means those articles,
materials, and supplies to be acquired for public use.”2018 However, determining whether an item is
an end product, or a component of an end product, can be complicated, particularly when the
agency seeks to acquire some sort of “system,”2119 and judicial and other tribunals often look to the
purpose of the procurement in making such determinations.2220
End Product, Or Component?
Determining whether an item is an end product or a component can be crucial to the outcome in a
Buy American Act case. End products must be manufactured in the United States. Individual
components, however, could potentially be manufactured outside the United States so long as at least
50% of the costs of all components are manufactured in the United States. Competing views on
whether something is an end product or a component are possible, though, as is illustrated by one
procurement where the Government Accountability Office (GAO) and a federal court reached
differing conclusions as to whether a particular item was its own end product, or a component of
another end product. GAO viewed the item as its own end product, because it was not directly
incorporated into the “system” of which it was allegedly a part. See Bell Helicopter Textron, B195268 (Apr. 24, 1980). A federal court, on the other hand, found that the contracting officer had
reasonably determined that the item was a component of a system, in part, because the Buy American
certificates (discussed below) submitted by the winning bidder characterized it this way. See Textron,
Inc., Bell Helicopter Textron Div. v. Adams, 493 F. Supp. 824 (D.D.C. 1980).
(...continued)
foreign end products where the price of the domestic products was 36% higher than the price of the foreign ones).
17
The term domestic end product, in turn, includes unmanufactured end products mined or
produced in the United States. The term also encompasses end products manufactured in the
United States, provided that (1) the cost of the components mined, produced, or manufactured in
the United States exceeds 50% of the cost of all components, or (2) the end product is a
commercially available off the shelf (COTS) item.21
15
See, e.g., Bell Helicopter Textron, B-195268 (Dec. 21, 1979); Blodgett Keypunching Co., B-153751 (Oct. 14, 1976).
However, any “supply” portions of a service contract could potentially be subject to the Buy American Act.
1816
See, e.g., Military Optics, Inc., B-245010.3; B-245010.4 (Jan. 16., 1992) (“The fact that the manufacturer of a
domestically manufactured end product may be foreign owned is not a factor to be considered in determining whether
to apply the Buy American Act differential.”).
1917
41 U.S.C. §8302(a)(1); 48 C.F.R. §25.101(a).
2018
48 C.F.R. §25.003.
2119
See, e.g., MRI Sys., Corp., B-184785 (Nov. 19, 1976) (computer software system); Thomas J. Valentino, Inc., B156768 (Aug. 17, 1965) (music background library); Data Transformation Corp., GSBCA 89082-P, 87-3 B.C.A.
¶20,017 (1987) (automatic data processing system).
2220
See, e.g., Ampex Corp., B-203021 (Feb. 24, 1982) (finding that two videotape recorder/reproducer systems were not
end products because the solicitation for each system contained 15 line items, each of which could be viewed as an end
product).
Congressional Research Service
3
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
A domestic end product, in turn, includes unmanufactured end products mined or produced in the
United States. The term also encompasses end products manufactured in the United States,
provided that (1) the cost of the components mined, produced, or manufactured in the United
States exceeds 50% of the cost of all components, or (2) the end product is a commercially
available off the shelf (COTS) item.23
21
48 C.F.R. §25.003. The Buy American Act itself refers items being manufactured “substantially all” from articles,
materials, or supplies produced in the United States. See 41 U.S.C. §8302(a). However, the executive branch has long
construed “substantially all” to mean at least 50%, and this interpretation has been upheld as within the executive
(continued...)
Congressional Research Service
3
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Manufacture is not defined by the Buy American Act, the executive orders implementing the
act,2422 or the FAR, and determining whether particular activities constitute “manufacturing”—such
that a product can be said to be manufactured in the United States—can be complicated.2523 In
answering this question, judicial and other tribunals have, at various times, considered whether
there were “substantial changes in physical character”;2624 whether separate manufacturing stages
were involved, or whether there was one continuous process;2725 and whether the article is
completed in the form required by the government.2826 Operations performed after the item has
been completed (e.g., packaging, testing) generally are not viewed as manufacturing.2927
What Constitutes Manufacture In the United States?
The act generally requires that the end product and at least 50% of the costs of all
components be
manufactured in the United States, but “manufacturing” in the United States
would not
necessarily preclude all processing overseas. In one case, GAO distinguished
between two fax
machines offered by the same vendor. Both fax machines incorporated
commercial Japanese
fax machines. However, GAO found that one machine (and at least 50%
of the cost of its
components) was manufactured in the United States because the vendor
performed a
number of assembly operations in the United States in the course of
transforming the
Japanese machine into the form required for government use. In the other
case, the fax
machine was found not to be compliant with the Buy American Act because all
the vendor
did in the United States was to replace one circuit on the Japanese fax machine.
See General
Kinetics, Inc., Cryptek Div., B-242052.2 (May 7, 1991).
A component is any “article, material, or supply incorporated directly into an end product or
construction material.”3028 However, distinguishing between components and end products can be
difficult, as previously noted. In addition, it is important to note that components could
potentially be deemed to be mined, produced, or manufactured in the United States, regardless of
23
48 C.F.R. §25.003. The Buy American Act itself refers items being manufactured “substantially all” from articles,
materials, or supplies produced in the United States. See 41 U.S.C. §8302(a). However, the executive branch has long
construed “substantially all” to mean at least 50%, and this interpretation has been upheld as within the executivetheir actual place of origin, if (1) the end product in which they are incorporated is manufactured
in the United States, and (2) the components are of a class or kind determined by the government
not to be mined, produced, or manufactured in the United States in “sufficient and reasonably
available commercial quantities of a satisfactory quality,” as discussed below.29
(...continued)
branch’s discretion. See, e.g., Allis-Chalmers Mfg. Co., B-147210 (Nov. 27, 1961).
2422
See especially Executive Order 10582, 19 Fed. Reg. 8723 (Dec. 21, 1954).
2523
See, e.g., A. Hirsch, Inc., B-237466 (Feb. 28, 1990) (“The concept of what precisely constitutes ‘manufacturing’ for
the purpose of the Act remains largely undefined; accordingly we have noted in our decisions in this area that each
involves a peculiar factual situation and at best only provides conceptual guidance in determining whether a given set
of operations constitutes manufacturing.”).
2624
Id. But see A&D Machinery Co., B-242546; B-242547 (May 16, 1991) (stating that the test is not whether a foreign
product has been significantly altered in the United States, but whether the item being procured is made suitable for its
intended use, and its identity is established, in the United States).
2725
See, e.g., Cincinnati Elec. Corp., B-185842 (Sept. 27, 1976).
2826
See, e.g., Valentec Wells, Inc., ASBCA 41659, 91-3 B.C.A. ¶24,168 (1991); DynAmerica, Inc., B-248237 (Sept. 28,
1992).
2927
See, e.g., Marbex, Inc., B-225799 (May 4, 1987).
3028
48 C.F.R. §25.003. See also Patterson Pump Co., B-200165 (Dec. 31, 1980) (model testing and plans and
instructions are not components because they are not incorporated physically and directly into the end products);
Hawaiian Dredging & Constr. Co., a Dillingham Co., B-195101 (Apr. 8, 1980) (feasibility study not a component).
Congressional Research Service
4
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
their actual place of origin, if (1) the end product in which they are incorporated is manufactured
in the United States, and (2) the components are of a class or kind determined by the government
not to be mined, produced, or manufactured in the United States in “sufficient and reasonably
available commercial quantities of a satisfactory quality,” as discussed below.31
29
See, e.g., 48 C.F.R. §25.003 (“Components of foreign origin of the same class or kind for which nonavailability
determinations have been made are treated as domestic.”); Octagon Process, Inc., B-186850 (Dec. 22, 1976).
Congressional Research Service
4
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Is It a Component? Or a Constituent Material of a Component?
Whether something is viewed as a component or—essentially—a subcomponent can also
significantly affect the outcome in a Buy American Act case, since the act is expressly
concerned with the components of end products. For example, in one case, GAO rejected
the protester’s argument that steel processed in Korea remained a domestic component in a
procurement of lock sets. The protester had purchased the steel in the United States and
shipped it to Korea for fabrication. The fabricated steel was then returned to the United
States where it was manufactured into lock sets. The protester argued that the Koreanfabricated steel was a domestic component because it was steel, and the steel had originally
been manufactured in the United States. GAO disagreed, because it viewed the Koreanfabricated steel, not the American-produced steel, as the relevant component of the lock
sets. See Yohar Supply Co., B-225480 (Feb. 11, 1987).
The costs of components are generally determined based upon certain costs incurred by the
contractor in purchasing or manufacturing the components. Specifically,
•
for components purchased by the contractor, the cost of components includes the
acquisition costs (including transportation costs to the place of incorporation into
the end product or construction material), and any applicable duty (regardless of
whether a duty-free certificate of entry is issued);3230 and
•
for components manufactured by the contractor, the cost of components includes
all costs associated with the manufacture of the component (including
transportation costs, as discussed above), and allocable overhead costs,33 but
excluding 31 but excluding
profits and any costs associated with the manufacture of the end
product.3432
Commercially available off-the-shelf (COTS) items generally include any item of supply
(including construction material) that is (1) a “commercial item,” as discussed below; (2) sold in
substantial quantities in the commercial marketplace; and (3) offered to the government without
modification, in the same form in which it is sold in the commercial marketplace.35
31
See, e.g., 48 C.F.R. §25.003 (“Components of foreign origin of the same class or kind for which nonavailability
determinations have been made are treated as domestic.”); Octagon Process, Inc., B-186850 (Dec. 22, 1976).
32
33
Purchases of Construction Materials
The Buy American Act similarly bars agencies from using nondomestic construction materials
absent exceptional circumstances.34 Construction material generally encompasses any “article,
material, or supply brought to the construction site by a contractor or subcontractor for
incorporation into [a] building or work,” including items brought to the site preassembled from
articles, materials, or supplies.35 However, materials purchased directly by the government are
supplies, not construction materials.36
30
48 C.F.R. §25.003. This includes any “mark-ups” by middlemen. See Lyntronics, Inc., B-195268 (Dec. 21, 1979).
33
Costs are generally allocable to a government contract if they (1) are incurred specifically for the contract; (2)
benefit both the contract and other work, and can be distributed to each in reasonable proportion to the benefits; or (3)
are necessary to the overall operation of the business, even if a direct relationship to any particular cost objective
cannot be shown. See generally 48 C.F.R. §31.201-4.
3432
48 C.F.R. §25.003.
3533
48 C.F.R. §2.101. However, “bulk cargo,” such as agricultural and petroleum products, is expressly excluded. Id.
34
41 U.S.C. §8303(a)(1)-(2); 48 C.F.R. §25.201.
35
48 C.F.R. §25.003.
36
Id.
31
Congressional Research Service
5
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Purchases of Construction Materials
The Buy American Act similarly bars agencies from using nondomestic construction materials
absent exceptional circumstances.36 Construction material generally encompasses any “article,
material, or supply brought to the construction site by a contractor or subcontractor for
incorporation into [a] building or work,” including items brought to the site preassembled from
articles, materials, or supplies.37 However, materials purchased directly by the government, for
the contractor’s use or otherwise, are supplies, not construction materials.38
Construction Materials, or Supplies?
Whether items are viewed as construction materials, or supplies, can have significant
implications in Buy American Act cases, since the price differentials for supplies are not
identical to those for construction materials. In particular, the 12% differential applied to
domestic offers by small businesses has been found to apply only in acquisitions of supplies,
not construction. In construction contracts, a 6% differential is generally used, unless defense
agencies are involved or the procuring agency has established a higher differential by
regulation. See, e.g., Concrete Tech., Inc., B-202407 (Oct. 27, 1981) (rejecting the protester’s
argument that the contract in question was a supply contract subject to a 12% price
differential).
Domestic construction material, in turn, includes unmanufactured construction materials mined
or produced in the United States, as well as construction material manufactured in the United
States, provided that (1) the cost of the components mined, produced, or manufactured in the
United States exceeds 50% of the cost of all components, or (2) the construction material is a
COTS item.3937
Other key terms, including manufacture, components, and COTS, are defined in the same way for
construction materials as for end products. The costs of construction materials are also generally
calculated in the same way as the costs of end products.
Exceptions to the Buy American Act
The FAR lists five “exceptions” to the Buy American Act, or five circumstances in which an
agency may purchase foreign end products or use foreign construction materials without violating
the act. These exceptions apply when (1) the procurement of domestic goods or the use of
domestic construction materials would be inconsistent with the public interest; (2) domestic end
products or construction materials are unavailable; (3) the contracting officer determines that the
costs of domestic end products or construction materials would be unreasonable; (4) the agency is
procuring information technology that is a commercial item; or (5) the goods are acquired
specifically for commissary resale.40 However, some commentators also view the requirements
36
41 U.S.C. §8303(a)(1)-(2); 48 C.F.R. §25.201.
48 C.F.R. §25.003. However, “emergency life safety systems” (e.g., emergency lighting, fire alarms) that are discrete
systems which are incorporated into a public building or work and are produced as complete systems, are evaluated as
single and discrete construction material regardless of when or how the individual parts or components are delivered to
the construction site. Id.
38
Id.
39
Id.
40
48 C.F.R. §25.103 (exceptions for supply contracts); 48 C.F.R. §25.202 (exceptions for construction contracts).
37
Congressional Research Service
6
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
that purchases be above the micro-purchase threshold, and for use in the United States, as
exceptions to the Buy American Act.41
The procuring agency may determine, on its own initiative, whether one of these exceptions
applies. Alternatively, particularly in the case of construction contracts, vendors may request that
the contracting officer make a determination regarding the applicability of an exception prior to
or after contract award.42 Contractors are, however, generally not entitled to a determination that
an exception applies.4338 However, some commentators also view the requirements
that purchases be above the micro-purchase threshold, and for use in the United States, as
exceptions to the Buy American Act.39
The procuring agency may determine, on its own initiative, whether one of these exceptions
applies. Alternatively, particularly in the case of construction contracts, vendors may request that
the contracting officer make a determination regarding the applicability of an exception prior to
or after contract award.40 Contractors are, however, generally not entitled to a determination that
an exception applies.41
37
Id.
48 C.F.R. §25.103 (exceptions for supply contracts); 48 C.F.R. §25.202 (exceptions for construction contracts).
39
See, e.g., 9-50 Gov’t Conts.: Law, Admin. & Proc. §50.60[1] (listing “products ... to be used outside the United
States” and “goods ... procured under an award with a value less than the ‘micro-purchase threshold’” as exceptions to
the Buy American Act).
40
48 C.F.R. §§25.203, 25.205.
41
See, e.g., Two State Constr. Co., DOTCAB 78-31 (1981).
38
Congressional Research Service
6
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Impracticable or Inconsistent with the Public Interest
The Buy American Act and its implementing regulations expressly authorize agencies to purchase
foreign end products and use foreign construction materials if the head of the contracting agency
determines that application of the act’s restrictions would be “impracticable” or “inconsistent with
the public interest.”4442 The “public interest” prong of this exception encompasses agency
agreements with foreign governments that provide for the purchase of foreign end products or
construction materials,4543 as well as ad hoc determinations that application of the act’s restrictions
would not be in the public interest. Such determinations are typically seen as entrusted to agency
discretion, and generally will not be reviewed by judicial or other tribunals.4644
Nonavailability
The act and its implementing regulations also permit agencies to purchase foreign end products
and use foreign construction materials when the relevant articles, materials, or supplies are not
mined, produced, or manufactured in the United States “in sufficient and reasonably available
commercial quantities and of a satisfactory quality.”4745 In some cases, the government has made a
determination that particular classes of products are nonavailable.4846 However, such “class
determinations” mean only that domestic sources can meet 50% or less of the total U.S.
41
See, e.g., 9-50 Gov’t Conts.: Law, Admin. & Proc. §50.60[1] (listing “products ... to be used outside the United
States” and “goods ... procured under an award with a value less than the ‘micro-purchase threshold’” as exceptions to
the Buy American Act).
42
48 C.F.R. §§25.203, 25.205.
43
See, e.g., Two State Constr. Co., DOTCAB 78-31 (1981).
44
government and nongovernment demand,47 and procuring agencies must generally seek domestic
sources prior to acquiring, as an end product or a “significant component” of an end product, an
item that belongs to a class which has been determined to be nonavailable.48 In other cases, the
head of the contracting agency may determine in writing that goods which are not subject to class
determinations are nonavailable.49 However, written determinations of nonavailability are not
required if the acquisition was conducted using “full and open competition”;50 was synopsized as
required in Subpart 5.201 of the FAR;51 and resulted in no offer of a domestic end product.52
42
41 U.S.C. §8302(a) (supplies); 41 U.S.C. §8303(b)(2) (construction); 48 C.F.R. §25.103(a).
45
See, e.g., Israel Military Indus., B-211761 (Nov. 21, 1983) (“The Buy American Act clearly vests within the agency
head’s discretion the decision whether to waive the act’s requirements and the decision regarding waiver may be made
by appropriate [agency] officials under a memorandum of understanding in a proper exercise of the act’s discretion.”):
.”): General Motors Canada Ltd., B-212884 (Oct.
7, 1983) (similar).
44.
46
See, e.g., Lear Siegler, Inc., B-218188 (Apr. 8, 1985) (“We have recognized that a determination of whether a
particular purchase from a domestic source under the Buy American Act is inconsistent with the public interest is a
matter of discretion vested in the head of the department or agency concerned.”); Israel Military Indus., B-211761
(Nov. 21, 1983) (“Since the discretion to waive the Buy American Act is vested in the agency heads by statute, our
Office will not review the [agency’s] determination [regarding] whether to waive the act’s provisions in this
procurement.”).
4745
48 C.F.R. §25.103(b). See also 41 U.S.C. §8302(a)(2)(B) (supplies); 41 U.S.C. §8303(b)(1)(B) (construction).
4846
See generally 48 C.F.R. §25.104(a). This listing is to be published in the Federal Register for public comment “no
less frequently” than once every five years. 48 C.F.R. §25.104(b).
Congressional Research Service
7
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
government and nongovernment demand,49 and procuring agencies must generally seek domestic
sources prior to acquiring, as an end product or a “significant component” of an end product, an
item that belongs to a class which has been determined to be nonavailable.50 In other cases, the
head of the contracting agency may determine in writing that goods which are not subject to class
determinations are nonavailable.51 However, written determinations of nonavailability are not
required if the acquisition was conducted using “full and open competition”;52 was synopsized as
required in Subpart 5.201 of the FAR;53 and resulted in no offer of a domestic end product.54
47
48 C.F.R. §25.103(b)(1)(i).
48
48 C.F.R. §25.103(b)(ii). If the contracting officer learns, at any time before the time designated for the receipt of
offers, that an article that has been determined to be unavailable on a class basis is available domestically in sufficient
and reasonably available commercial quantities of a satisfactory quality to meet the agency’s requirements, the
contracting officer must conduct the procurement in accordance with the Buy American Act. 48 C.F.R. §25.103(b)(iii).
49
48 C.F.R. §25.103(b)(2). See also Hispano Am. Corp., B-200268 (Mar. 17, 1987) (domestic end products may
generally be presumed to be nonavailable if no domestic offers are received).
50
Full and open competition generally means that “all responsible sources are permitted to submit sealed bids or
competitive proposals on the procurement.” 41 U.S.C. §107.
51
Subpart 5.2 of the FAR generally requires that agencies post information about prospective contract awards.
43
Congressional Research Service
7
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Examples of Nonavailable Items Subject to Class Determinations
anise; bamboo shoots; bananas; canned corned beef; books and other publications not
printed in the United States and for which domestic editions are unavailable; cashew nuts;
chestnuts; goat and kidskins; canned grapefruit sections; handsewing needles; hemp yarn; olive
oil; canned pineapple; quartz crystals; rabbit fur felt; shellac; raw and unmanufactured silk;
spare and replacement parts for equipment of foreign manufacture for which domestic parts
are not available; raw sugars; tea in bulk; tungsten; vanilla beans; cobra venom; wire glass;
active dry yeast
Unreasonable Cost
The Buy American Act and its implementing regulations also authorize the purchase of foreign
end products and construction materials if the cost of domestic end products or construction
materials would be “unreasonable.”5553 In practice, this exception is generally implemented through
the price preferences granted to U.S. products in procurements where foreign bids or offers are
the lowest priced or offer “best value,” as discussed above.
Resale
The FAR expressly authorizes contracting officers to purchase foreign end products (there is no
similar exception for construction materials) when the products are specifically for commissary
resale.5654 This exception can be seen as consistent with the Buy American Act’s requirement that
domestic goods be “acquired for public use.”5755 Products for resale in commissaries are arguably
not for public use, since they are intended for resale to third parties.58
49
48 C.F.R. §25.103(b)(1)(i).
48 C.F.R. §25.103(b)(ii). If the contracting officer learns, at any time before the time designated for the receipt of
offers, that an article that has been determined to be unavailable on a class basis is available domestically in sufficient
and reasonably available commercial quantities of a satisfactory quality to meet the agency’s requirements, the
contracting officer must conduct the procurement in accordance with the Buy American Act. 48 C.F.R. §25.103(b)(iii).
51
48 C.F.R. §25.103(b)(2). See also Hispano Am. Corp., B-200268 (Mar. 17, 1987) (domestic end products may
generally be presumed to be nonavailable if no domestic offers are received).
52
Full and open competition generally means that “all responsible sources are permitted to submit sealed bids or
competitive proposals on the procurement.” 41 U.S.C. §107.
53
Subpart 5.2 of the FAR generally requires that agencies post information about prospective contract awards.
54
48 C.F.R. §25.103(c)(i)-(iii).
5556
Information Technology that Is a Commercial Item
For acquisitions conducted using FY2004 or subsequent fiscal year funds, agencies are exempt
from the Buy American Act when acquiring information technology that is a commercial item.57
For purposes of this exception, information technology means “any equipment, or interconnected
system(s) or subsystem(s) of equipment,” used by the agency in acquiring, storing, managing, or
transmitting data or information, while a commercial item is
[a]ny item, other than real property, that is of a type customarily used by the general public
or by non-governmental entities for purposes other than governmental purposes, and (i) [h]as
(...continued)
52
48 C.F.R. §25.103(c)(i)-(iii).
53
41 U.S.C. §8302(a)(1) (supplies); 41 U.S.C. §8303(b)(3) (construction); 48 C.F.R. §25.103(c).
5654
48 C.F.R. §25.103(d).
5755
41 U.S.C. §8302(a). See also 48 C.F.R. §25.003 (defining “end product” to mean articles, materials, and supplies to
be acquired “for public use”).
5856
The Buy American Act has been found not to apply when supplies are purchased by a federal agency for use by an
(continued...)
50
Congressional Research Service
8
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Information Technology that Is a Commercial Item
For acquisitions conducted using FY2004 or subsequent fiscal year funds, agencies are exempt
from the Buy American Act when acquiring information technology that is a commercial item.59
For purposes of this exception, information technology means “any equipment, or interconnected
system(s) or subsystem(s) of equipment,” used by the agency in acquiring, storing, managing, or
transmitting data or information, while a commercial item is
[a]ny item, other than real property, that is of a type customarily used by the general public
or by non-governmental entities for purposes other than governmental purposes, and (i) [h]as
entity other than the federal government. See, e.g., Dep’t of the Treasury—Request for an Advance Decision, B-193603
(Mar. 14, 1979) (finding that a procurement of nickel to be made into coins for the Dominican Republic was not subject
to the Buy American Act because they were not for public use).
57
48 C.F.R. §25.103(e).
Congressional Research Service
8
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
been sold, leased, or licensed to the general public; or (ii) [h]as been offered for sale, lease,
or license to the general public.6058
Use Outside the United States
The Buy American Act expressly provides that agencies are not required to purchase domestic
end products or construction materials “for use outside of the United States.”6159 As used here, the
“United States” includes the 50 states, the District of Columbia, and “outlying areas” (e.g., Puerto
Rico),6260 but excludes areas over which the United States lacks “complete sovereign jurisdiction,”
such as military bases leased from foreign governments.6361
Purchases Below the Micro-Purchase Threshold
The act only applies to contracts whose value exceeds the micro-purchase threshold (generally,
$3,000).64
Enforcement and Reporting
When the procurement is for the acquisition of supplies, prospective vendors are required to
provide a Buy American certificate, wherein the vendor attests
that each end product, except those listed [below] ... is a domestic end product and that, for
other than COTS items, the offeror has considered components of unknown origin to have
been mined, produced, or manufactured outside the United States.65
(...continued)
entity other than the federal government. See, e.g., Dep’t of the Treasury—Request for an Advance Decision, B-193603
(Mar. 14, 1979) (finding that a procurement of nickel to be made into coins for the Dominican Republic was not subject
to the Buy American Act because they were not for public use).
59
48 C.F.R. §25.103(e).
60
48 C.F.R. §2.101.
61
62
Waiver Pursuant to the Trade Agreements Act
Although not an exception to the Buy American Act, per se, the Trade Agreements Act (TAA) of
1979, as amended, can result in certain “foreign” products being treated the same as “domestic”
ones in specific procurements. The TAA generally authorizes the waiver of “any law, regulation,
procedure, or practice regarding Government procurement” that would result in “eligible
products” from countries with which the United States has a trade agreement, or that meet certain
other criteria (e.g., “least developed countries”63), being treated “less favorably” than domestic
products and suppliers.64 The Buy American Act has been so waived.65 This means that products
that are wholly grown, produced, or manufactured in certain foreign jurisdictions, or
“substantially transformed” into new and different articles within these jurisdictions, may be
treated the same as “domestic” ones in particular procurements.
58
48 C.F.R. §2.101.
41 U.S.C. §8302(a)(2)(A). See also 41 U.S.C. §8303(b)(1)(A) (construction materials for use outside the United
States).
6260
41 U.S.C. §8302(a)(2)(C) (supplies); 41 U.S.C. §8303(b)(1)(C) (construction); 48 C.F.R. §25.003.
6361
See, e.g., Anderson Columbia Co., B-249475.3 (Feb. 5, 1993); Secretary of the Navy, B-122519 (Mar. 16, 1955).
6462
41 U.S.C. §8302(a)(2)(C); 41 U.S.C. §8303(b)(1)(C). For more on the micro-purchase threshold, see generally 48
C.F.R. §2.101 (defining micro-purchase threshold).
63
The term least developed countries includes “any country on the United Nations (UN) General Assembly list of least
developed countries.” 19 U.S.C. §2518(6). Initially, the UN applied this designation to countries with low per capita
gross domestic product (GDP) and structural impediments to growth. However, since 2011, the designation has been
used to describe countries that “suffer[]from the most severe structural impediments to sustainable development.” See
UN Dev. Policy and Analysis Division, LDC Information: The Criteria for Identifying Least Developed Countries:
Overview, Aug. 2013, available at http://www.un.org/en/development/desa/policy/cdp/ldc/ldc_criteria.shtml.
64
19 U.S.C. §2511(a)-(b). There are other statutory provisions that also permit waiver of the Buy American Act or
domestic preferences. See, e.g., 10 U.S.C. §2350b (permitting waiver in the context of the acquisition of defense
equipment for cooperative projects under the Arms Export Control Act).
65
48 C.F.R. §25.402(a)(1).
59
Congressional Research Service
9
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
However, such nondiscriminatory treatment only applies when (1) the procuring agency is one
covered by the agreement;66 (2) the goods or services being procured are covered by the
agreement;67 (3) the value of the goods or services meets or exceeds certain monetary thresholds
specified in the agreement;68 and (4) the circumstances of the procurement are not such that it is
otherwise exempt from the TAA’s waiver of the Buy American Act (e.g., procurements set-aside
for small businesses).69 In addition, unlike the trade agreements, certain other international
agreements, which are outside the scope of this report, call for the use of U.S. products in
procurements conducted outside the United States.70
Enforcement and Reporting
When the procurement is for the acquisition of supplies, prospective vendors are required to
provide a Buy American certificate, wherein the vendor attests
that each end product, except those listed [below] ... is a domestic end product and that, for
other than COTS items, the offeror has considered components of unknown origin to have
been mined, produced, or manufactured outside the United States.71
Congressional Research Service
9
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
Similar certificates are not required with construction contracts, although construction contractors
are to request any “waivers” of the act at the time when they submit their offer, and must also
submit data adequate for the government to evaluate their requests.6672 Agency officials are
generally entitled to rely upon the representations made by vendors regarding their products, and
need not inquire further into the origins of particular products or components unless they have
reason to believe that the contractor might have misrepresented whether its products are mined,
produced, or manufactured in the United States, as required by the act.67
Vendors could potentially challenge an agency’s implementation of the Buy American Act, or
another vendor’s compliance with it, prior to contract award as part of a bid protest.68
66
The World Trade Organization (WTO) Government Procurement Agreement (GPA), for example, generally applies
to the procurements of federal agencies listed in Appendix I, Annex I, to the Agreement, including the Department of
Defense, General Services Administration, and National Aeronautics and Space Administration. However, the
procurements of certain agencies are expressly excluded (e.g., those of the Federal Aviation Administration), as are
specified procurements of listed agencies (e.g., procurements conducted by the the U.S. Agency for International
Development “for the direct purpose of providing foreign assistance”).
67
Appendix I, Annex I, to the WTO GPA also lists the categories of supplies and services subject to the Agreement
(e.g., furniture, agricultural supplies, live animals, construction and building materials, instruments and laboratory
equipment). However, certain supplies or services are expressly excluded from its coverage (e.g., public utilities
services, research and development, procurements of “specialty metals” by the Department of Defense).
68
For example, the WTO GPA specifies that it applies to procurements whose value exceeds certain monetary
thresholds, which are to be adjusted every two years for inflation. Currently, those thresholds are $204,000 for supplies
and services (other than construction), and $7.86 million for construction. See 48 C.F.R. §25.402(b).
69
See 48 C.F.R. §25.401(a) (excluding the following procurements from the application of the TAA: (1) acquisitions
set aside for small businesses; (2) acquisitions of arms, ammunition, or war materials, or purchases indispensable for
national security or national defense purposes; (3) acquisitions of end products for resale; (4) acquisitions from Federal
Prison Industries, Inc., under Subpart 8.6 of the FAR, or from nonprofit agencies employing persons who are “blind or
severely disabled” (commonly known as AbilityOne), under Subpart 8.7 of the FAR; and (4) other acquisitions not
using full and open competition, authorized under Subparts 6.2 or 6.3 of the FAR, when the limitation of competition
would preclude the use of the procedures of Subpart 25.4; or sole-source acquisitions justified in accordance with
Subpart 13.501.).
70
See generally 48 C.F.R. Subpart 225.75 (providing policies and procedures for implementing the Balance of
Payments Program, which generally establishes a preference for the acquisition of U.S. end products and construction
materials outside the United States).
71
48 C.F.R. §52.225-2(a).
72
48 C.F.R. §52.225-9(b) & (c).
Congressional Research Service
10
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
reason to believe that the contractor might have misrepresented whether its products are mined,
produced, or manufactured in the United States, as required by the act.73
Vendors could potentially challenge an agency’s implementation of the Buy American Act, or
another vendor’s compliance with it, prior to contract award as part of a bid protest.74 However,
after the time for a post-award protest has passed, the vendor’s compliance with the Buy
American Act is generally viewed as a matter of contract administration. In other words, any
noncompliance does not affect the validity of the contract, and cannot be protested by the
vendor’s competitors.6975 The procuring agency, however, has various contractual and
administrative remedies for any noncompliance after contract award.7076 These remedies include
monetary damages, termination for default,7177 and debarment or suspension.7278 Prime contractors,
in turn, are responsible for ensuring subcontractors’ compliance with the Buy American Act.7379
In addition, compliance with the Buy American Act’s requirements is also subject to
congressional and other oversight. For each of fiscal years 2009 through 2011, agencies were
required by statute to submit a report to Congress each year “on the amount of the acquisitions
made by the agency in that fiscal year of articles, materials, or supplies purchased from entities
that manufacture the articles, materials, or supplies outside of the United States.”74 The
(...continued)
65
48 C.F.R. §52.225-2(a).
66
48 C.F.R. §52.225-9(b) & (c).
6780 The
information in these reports was based, in part, on contractors’ certificates of compliance,
discussed above.81 However, the reports focused on the place of manufacture, per se, without
regard to the origin of the components.82 Thus, certain goods that would not count as domestic
end products or construction materials for purposes of the Buy American Act could potentially
73
Compare Spectrum Leasing Corp., B-218323.3 (July 11, 1986) (contracting officer had no reason to suspect the
awardee would provide Japanese end products just because its international headquarters was in Japan); with Oliver
Prods.
Co., B-245762 (Jan. 7, 1992) (where contracting officer has reason to question a certificate, the contracting
officer must
take “reasonable measures” to ensure the bidder will deliver a domestic end product).
6874
Such challenges would have to meet other requirements for a bid protest, such as timeliness. See generally CRS
Report R40228, GAO Bid Protests: An Overview of Time Frames and Procedures, by Kate M. Manuel and Moshe
Schwartz.
6975
See, e.g., Instrument Corp., B-239997 (Oct. 12, 1990) (“Whether the awardee will provide a domestic end product, as
it certified in its offer, or comply with the jewel bearings requirement, are matters of contract administration and are not
for consideration under the General Accounting Office’s bid protest function.”); Avantek, Inc., B-170498 (Mar. 30,
1971) (“Compliance with [the obligation to supply domestic end products] is a matter of contract administration which
has no effect on the validity of the contract.”).
7076
See, e.g., TFI Corp., B-192879 (Apr. 23, 1980) (agency opted to retain the foreign products and adjust the contract
price to reflect the difference in cost between the domestic products promised and the foreign products supplied).
7177
For more on termination for default, see generally CRS Report R43055, Terminating Contracts for the Government’s
Convenience: Answers to Frequently Asked Questions, by Kate M. Manuel et al. (discussing the difference between
termination for convenience and for default).
7278
For more on debarment and suspension, see generally CRS Report RL34753, Debarment and Suspension of
Government Contractors: A Legal Overview, by Kate M. Manuel.
7379
See, e.g., Appeal of Allen L. Bender, Inc., ASBCA 38068, 89-3 B.C.A. ¶22,092 (1989).
74
41 U.S.C. §8302(b)(1). As of the date of this writing, the FAR still contains the reporting requirement, and does not
make reference to it applying only to certain fiscal years. See 48 C.F.R. §25.004(a). However, on June 21, 2013, the
Federal Acquisition Regulatory Council proposed a final rule that amends the FAR to eliminate this requirement. See
Dep’t of Defense, Gen. Servs. Admin., & Nat’l Aeronautics & Space Admin., Federal Acquisition Regulation: Deletion
of Report to Congress on Foreign-Manufactured Products, 78 Fed. Reg. 37694 (June 21, 2013). It should also be noted
(continued...)
Congressional Research Service
10
.
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
information in these reports was based, in part, on contractors’ certificates of compliance,
discussed above.75 However, the reports focused on the place of manufacture, per se, without
regard to the origin of the components.76 Thus, certain goods that would not count as domestic
end products or construction materials for purposes of the Buy American Act could potentially
80
41 U.S.C. §8302(b)(1). The Department of Defense has a separate statutory requirement to submit annual reports to
Congress on the “amount of purchases by the Department ... from foreign entities,” which does not apply to specific
fiscal years and remains in effect. 41 U.S.C. §8305.
81
See 48 C.F.R. §25.004(b).
82
48 C.F.R. §25.001(c)(3) (“For the reporting requirement at 25.004, the only criterion is whether the place of
manufacture of an end product is in the United States or outside the United States, without regard to the origin of the
component.”).
Congressional Research Service
11
The Buy American Act in Brief: Preferences for “Domestic” Supplies and Materials
have counted as made in the United States for purposes of these reports (e.g., goods made in the
United States from 100% foreign components).
Separate from the annual reports to Congress, agencies are required to input data into the Federal
Procurement Data System (FPDS) regarding whether the goods they procure are manufactured
inside the United States “in accordance with the Buy American Act.”7783 Agencies must also note
any exceptions to or waivers of the act’s requirements. These requirements are not tied to
particular fiscal years, unlike the government-wide reports to Congress.
Author Contact Information
Kate M. Manuel
Legislative Attorney
kmanuel@crs.loc.gov, 7-4477
Acknowledgments
Former CRS Legislative Attorney, John R. Luckey, authored the report, CRS Report 97-765, The Buy
American Act: Requiring Government Procurements to Come from Domestic Sources, upon which this
report is based.
(...continued)
that the Department of Defense has a separate requirement to submit annuals report to Congress on the “amount of
purchases by the Department ... from foreign entities,” which does not apply only to specific fiscal years. 41 U.S.C.
§8305.
75
See 48 C.F.R. §25.004(b).
76
48 C.F.R. §25.001(c)(3) (“For the reporting requirement at 25.004, the only criterion is whether the place of
manufacture of an end product is in the United States or outside the United States, without regard to the origin of the
component.”).
7783
GSA Federal Procurement Data System-Next Generation (FPDS-NG) Data Element Dictionary, Version 1.4.4, at
108-09 (May 21, 2013), available at https://www.fpds.gov/downloads/Version_1.4.4_specs/
FPDSNG_DataDictionary_V1.4.4.pdf (requiring reporting on “place of manufacture”). FPDS is slated to be
incorporated into the System for Award Management (SAM) eventuallyat some point in the future. See generally CRS Report
R43111,
Transforming Government Acquisition Systems: Overview and Selected Issues, by L. Elaine Halchin.
Congressional Research Service
1112