Wildfire Smoke and Air Quality

Wildfire Smoke and Air Quality

INSIGHTi

Wildfire Smoke and Air Quality
July 7, 2023
Air quality and associated health impacts have long been affected by a variety of factors. Some Members
of Congress have expressed concern about health risks from wildfire smoke, which contains fine particles.
This Insight provides background on air quality standards and trends, air quality data sources, federal air
quality requirements related to wildfires, and wildfire smoke response programs.
Background
Smoke from wildfires and prescribed burning, along with emissions from power plants, automobiles, and
industrial sources, contribute to fine particles (less than 2.5 microns, or “PM2.5”) in ambient (outdoor)
air. The Clean Air Act (CAA) requires the U.S. Environmental Protection Agency (EPA) to establish
minimum national standards for ambient air quality. EPA has set and periodically revised national ambient
air quality standards (NAAQS) for six “criteria” air pollutants, including the principal constituent of
wildfire smoke: fine particles. Under the CAA, states have primary responsibility for assuring compliance
with NAAQS and establishing state implementation plans intended to meet these standards. To simplify
reporting, EPA developed a color-coded “Air Quality Index” (AQI), ranging from 0-500, with an AQI of
100 corresponding to the short-term NAAQS for a specific pollutant.
Wildfire smoke is a complex mixture of gases and fine particles that temporarily degrades air quality over
long distances—potentially thousands of miles—and may harm human health. The chemical composition
of smoke depends on various factors, including burn conditions (e.g., fire temperature) and type of
materials burned (e.g., vegetation or structures). Fine particles are the principal pollutant of concern from
wildfire smoke. Additional pollutants of concern from wildfire smoke include carbon monoxide,
hazardous air pollutants, and emissions that contribute to the formation of ground-level ozone.
EPA’s National Emissions Inventory (NEI) identifies wildfires as a major contributor of fine particles,
though quantifying the precise contribution remains an active area of research. Generally, air quality
impairment from fine particles has declined by more than half during the past few decades, and ozone
remains the more common air pollution concern generally. The pollutant of concern to particular
communities varies greatly and depends on specific location and time considerations.
Fine particles from smoke can be inhaled deeply into the lungs, and may contribute to a range of health
effects, including eye irritation, sore throat, coughing, breathing difficulties, worsening of preexisting
heart and lung disease, and increased premature mortality. While smoke may affect the health of any
Congressional Research Service
https://crsreports.congress.gov
IN12194
CRS INSIGHT
Prepared for Members and
Committees of Congress

Congressional Research Service
2
individual exposed, sensitive populations—children, pregnant women, and the elderly—are more
vulnerable to the exposure. Also, wildland firefighters are exposed to particles and other smoke
constituents, including carcinogens. Less is known about cumulative and long-term exposure to wildfire
smoke.
Air Quality Requirements and Wildfires
Air quality impacts from wildfire smoke may be measured by air monitoring stations comprising a
national network. This monitoring network, in combination with modeling analyses, informs
determinations about NAAQS compliance. Congress authorized EPA to treat emissions from certain
natural events differently than those from anthropogenic sources. The CAA allows EPA to exclude air
quality data from regulatory decisions if air quality is demonstratively influenced by “exceptional events”
such as certain natural events (42 U.S.C. §7619(b)). EPA described conditions under which states and
tribes can demonstrate that air quality impacts from wildfires (or prescribed fires) should be excluded
from NAAQS compliance determinations.
Wildfire smoke may also affect implementation of CAA visibility requirements. The CAA established a
national visibility goal and authorized a regional haze program to protect visibility in national parks and
wilderness areas (42 U.S.C. §7491).
State-level regulations may also apply to wildfire smoke. Many states have developed programs to
manage and control smoke from prescribed burns. Smoke management plans seek to minimize smoke
entering populated areas, prevent public safety hazards, and maintain CAA compliance.
Wildfire Smoke Response
Wildfire response strategies include air quality monitoring, smoke forecasting, and timely communication
of air quality conditions and related health risks to the public. Various federal, tribal, state, and local
agencies contribute to these tasks.
EPA and other agencies have developed tools to measure air quality conditions and alert the public. For
example, EPA manages AirNow, a multiagency website that reports air quality based on monitoring data
received on a regular basis from state, local, and federal agencies.
AirNow reports air quality information using the AQI, a nationally uniform index. EPA calculates the AQI
for a criteria pollutant based on the ambient concentration of that pollutant. The higher the AQI, the
greater the level of air pollution. EPA describes AQI values of 100 or lower as satisfactory.
The Interagency Wildland Fire Air Quality Response Program (IWFAQRP) contributes to air quality
monitoring and communication. Led by the U.S. Forest Service (USFS), this interagency program was
created to address risks posed by wildland fire smoke. The program has a national cache of smoke
monitoring equipment and deploys technical specialists—Air Resource Advisors (ARAs)—during large
smoke events. ARAs may provide, install, and operate monitors, develop smoke forecasts, and share
information with wildfire response teams, air quality regulators, and the public.
The need for real-time air quality information is critical during wildfires. The frequency of air quality
reporting varies, however, depending on the equipment used. Also, permanent monitors may not be
located near the areas affected by smoke. While temporary monitors may be deployed, specialists also use
computer modeling to estimate pollution levels.
EPA, USFS, other agencies, and stakeholders are exploring emerging technologies to improve air quality
monitoring during wildfire events. For example, the AirNow Sensor Data Pilot adds air pollution data
from “low-cost sensors” to the Fire and Smoke Map, which also uses satellite imagery to track smoke.

Congressional Research Service
3
Federal agencies caution that such data should be considered supplemental to existing resources, given
uncertainties about the sensor data.
As Congress deliberates on wildfire legislation, it may consider options for monitoring strategies to help
inform smoke management and public health responses. Monitoring strategies may include some
combination of stationary monitors, mobile sensors, or models. Congress may also consider monitoring
costs, which may vary by location, along with public health benefits.

Author Information

James D. Werner

Section Research Manager

Disclaimer
This document was prepared by the Congressional Research Service (CRS). CRS serves as nonpartisan shared staff
to congressional committees and Members of Congress. It operates solely at the behest of and under the direction of
Congress. Information in a CRS Report should not be relied upon for purposes other than public understanding of
information that has been provided by CRS to Members of Congress in connection with CRS’s institutional role.
CRS Reports, as a work of the United States Government, are not subject to copyright protection in the United
States. Any CRS Report may be reproduced and distributed in its entirety without permission from CRS. However,
as a CRS Report may include copyrighted images or material from a third party, you may need to obtain the
permission of the copyright holder if you wish to copy or otherwise use copyrighted material.

IN12194 · VERSION 1 · NEW