Broadly understood, domestic content restrictions are provisions which require that items purchased using specific funds appropriated by Congress be produced or manufactured in the United States. Federal law contains a number of such restrictions, each of which applies to different entities and supplies, and imposes somewhat different requirements. Some of these restrictions have, however, been waived pursuant to the Trade Agreements Act (TAA).
The Buy American Act of 1933 is the earliest and arguably the best known of the major domestic content restrictions. It generally requires federal agencies to purchase "domestic end products" and use "domestic construction materials" on contracts exceeding the micro-purchase threshold (typically $3,000) performed in the United States. Unmanufactured end products or construction materials qualify as "domestic" if they are mined or produced in the United States. Manufactured ones are treated as "domestic" if they are manufactured in the United States, and either (1) the cost of components mined, produced, or manufactured in the United States exceeds 50% of the cost of all components, or (2) the items are commercially available off-the-shelf items. Agencies may, however, purchase "foreign" supplies in exceptional circumstances.
The TAA permits the President to waive the application of domestic content restrictions that would discriminate against "eligible" products or suppliers from countries that have trade agreements with the United States or meet certain other criteria. The Buy American Act is one restriction that has been so waived. This means that certain federal agencies must generally treat end products or construction materials that have been wholly grown, produced, or manufactured in designated countries, or that have been "substantially transformed" into new and different articles within designated countries using materials from other countries, the same as domestic ones when acquiring goods or services whose value exceeds certain monetary thresholds.
The Berry Amendment, as currently codified in 10 U.S.C. §2533a, requires that food, clothing, tents, certain textile fabrics and fibers, and hand or measuring tools purchased by the Department of Defense (DOD) using appropriated or other funds be entirely grown, reprocessed, reused, or produced within the United States, with certain exceptions (e.g., procurements by vessels in foreign waters). Until 2006, the Berry Amendment also required that any "specialty metals" (certain types of steel and metal alloys) contained in aircrafts, missile and space systems, ships, tank and automotive items, weapon systems, ammunition, or any components thereof, purchased by DOD be melted or produced in the United States, with certain exceptions. However, that prohibition has since been codified in 10 U.S.C. §2533b.
The Buy America Act is the name commonly given to domestic content restrictions imposed on states, localities, and other non-federal entities as a condition of receiving certain grant funds administered by the Department of Transportation. The nature of the restrictions can vary depending upon the funds involved. However, by way of example, 23 U.S.C. §313 generally requires Title 23 funding recipients to use in funded projects steel and iron produced in the United States, as well as manufactured products consisting "predominantly" of steel and iron that were produced in the United States, with certain exceptions (e.g., materials needed are not produced in the United States in sufficient and reasonably available quantities of satisfactory quality).
There are also a number of other domestic content restrictions that apply in specific contexts and, in many cases, are intended to address perceived "gaps" left by the four major domestic content regimes noted above.
Broadly understood, domestic content restrictions are provisions which require that items purchased using specific funds appropriated by Congress be produced or manufactured in the United States.1 Over the years, Congress has enacted a number of such restrictions, pursuant to its broad power over federal spending,2 in order to protect U.S. businesses and labor by generally barring the use of federal funds to purchase "foreign" products.3 However, these restrictions are potentially less stringent than they might at first appear, since Congress has permitted the President to waive them so that the United States may comply with its obligations under various international trade agreements and accomplish certain other goals;4 or expressly provided for supplies produced or manufactured in countries with which the United States has trade agreements to be treated the same as supplies produced or manufactured domestically.5 Such promotion of trade has also been seen as generally benefitting U.S. firms and labor by facilitating the export of supplies and services in whose production the United States enjoys competitive advantages.6
Federal law currently has four major domestic content regimes, which apply in different contexts and impose different requirements upon the use of federal procurement, grants, and other funds:
However, there are also a number of other domestic content restrictions that apply in specific contexts and, in many cases, are intended to address perceived "gaps" left by the four major domestic content regimes noted above.7
This report provides an overview of the Buy American Act, Trade Agreements Act, Berry Amendment (including its former specialty metals provision), and Buy America Act, specifically highlighting the commonalities and differences among them.8 The report also lists other federal domestic content restrictions codified in the U.S. Code. It does not address state or local "Buy American" provisions;9 nor does it address use of the "Made in America" label.10
It is also important to note that existing domestic content restrictions generally pertain to the place of production or manufacture of supplies.11 They generally do not address the place of performance of services, or, with certain exceptions, the nationality of the vendor.12
The Buy American Act is the earliest and arguably the best known of the major domestic content restrictions.13 On its face, the Buy American Act appears to prohibit federal agencies from acquiring14 "foreign" goods by providing that "[o]nly unmanufactured articles, materials, and supplies that have been mined or produced in the United States, and only manufactured articles, materials, and supplies that have been manufactured in the United States substantially all from articles, materials, or supplies mined, produced, or manufactured in the United States, shall be purchased for public use."15
As implemented, however, the act is better understood as generally establishing a price preference for domestic end products and construction materials.16 Specifically, the provisions of the Federal Acquisition Regulation (FAR) implementing the Buy American Act require that, when a domestic offer (i.e., an offer of a domestic end product) is not the low offer, the procuring agency must add a certain percentage of the low offer's price (inclusive of duty) to that offer before determining which offer is the lowest priced, or provides "best value" for the government.17 This percentage typically ranges from 6%, in cases where the lowest domestic offer is from a large business;18 to 12%, when the lowest domestic offer is from a small business;19 to 50%, for Department of Defense procurements,20 although agencies may adopt higher percentages by regulation.21 If the domestic offer is the lowest, or tied for lowest, after the application of this price preference, the agency must generally award the contract to the domestic offeror. However, if the foreign offer still has the lowest price, the agency may generally award the contract to the foreign offeror pursuant to provisions of the Buy American Act permitting the purchase of foreign end products, and the use of foreign construction materials, when the costs of domestic ones are "unreasonable."22
The Buy American Act makes separate provisions for federal agencies' purchase of supplies and their construction of "public works," as discussed below. It also incorporates several exceptions that permit the use of foreign end products and construction materials even if the cost of domestic ones is not "unreasonable." In addition, the application of the Buy American Act has been waived in certain procurements pursuant to the Trade Agreements Act (TAA).
As implemented by the FAR, the Buy American Act generally requires that federal agencies acquiring supplies for use in the United States under a contract valued in excess of the micro-purchase threshold (typically $3,000) purchase "domestic end products."23 Whether an end product (i.e., an article, material, or supply to be acquired for public use)24 is "domestic" depends, in part, upon whether it is unmanufactured or manufactured. Unmanufactured end products must be mined or produced in the United States in order to qualify as "domestic" for purposes of the Buy American Act.25 Manufactured end products, in contrast, qualify as domestic if they are manufactured in the United States, and either (1) the cost of the components mined, produced, or manufactured in the United States exceeds 50% of the cost of all components, or (2) the end product is a commercially available off-the-shelf (COTS) item.26
The meaning of "manufacture" is not defined by the Buy American Act, executive orders implementing the act,27 or the FAR, and determining whether particular activities constitute "manufacturing"—such that a product can be said to be manufactured in the United States—can be complicated.28 In answering this question, judicial and other tribunals have, at various times, considered whether there were "substantial changes in physical character";29 whether separate manufacturing stages were involved, or whether there was one continuous process;30 and whether the article is completed in the form required by the government.31 Operations performed after the item has been completed (e.g., packaging, testing) generally are not viewed as manufacturing.32
The cost of components, in turn, is generally determined based upon certain costs incurred by the contractor in purchasing or manufacturing the components. Specifically,
Specific components generally need not be manufactured in the United States, so long as at least 50% of the costs of all components are mined, produced, or manufactured in the United States, or the end product is a COTS item. In general, anything that is not itself acquired as an end product is seen as a component, even if the agency could theoretically have purchased it as an end product.36
The Buy American Act also generally requires that domestic materials be used in federal agencies' construction projects by prohibiting them from "allow[ing] the contractor to acquire foreign construction materials."37 Construction material generally includes any "article, material, or supply brought to the construction site by a contractor or subcontractor for incorporation into [a] building or work," including items brought to the site preassembled from articles, materials, or supplies.38 However, materials purchased directly by the government are treated as supplies, not construction materials.39
Domestic construction material includes unmanufactured construction material mined or produced in the United States, as well as construction material manufactured in the United States, provided that (1) the cost of the components mined, produced, or manufactured in the United States exceeds 50% of the cost of all components, or (2) the material is a COTS item.40 Manufacture is determined in the same way as for end products, and the costs of construction materials are also generally calculated in the same way as the costs of end products.41
The FAR lists five "exceptions" to the Buy American Act, or five circumstances in which an agency may purchase foreign end products, or permit the use of foreign construction materials, without violating the act. These exceptions apply when
However, some commentators also treat procurements whose value is at or below the micro-purchase threshold (generally $3,000), and procurements for use outside the United States, as exceptions to the act.47
The procuring agency may determine, on its own initiative, whether one of these exceptions applies. Alternatively, particularly in the case of construction contracts, vendors may request that the contracting officer make a determination regarding the applicability of an exception prior to or after contract award.48
In practice, the applicability of the Buy American Act is significantly limited by its waiver pursuant to the Trade Agreements Act, as discussed below. Its requirements generally only apply when (1) the anticipated value of the procurement is below the relevant monetary thresholds prescribed by U.S. trade agreements;49 (2) the acquisition involves agencies, supplies, or services, excluded from the coverage of particular trade agreements;50 or (3) the circumstances of the acquisition are otherwise such that the acquisition is exempt from the TAA's waiver of the Buy American Act (e.g., acquisitions set aside for small businesses).51
The Trade Agreements Act (TAA) allows the President to waive "the application of any law, regulation, procedure, or practice regarding Government procurement" that would discriminate against eligible products or suppliers from "designated countries" so that the United States may comply with its obligations under various international trade agreements and accomplish certain other goals.52 Laws subject to waiver include the Buy American Act and similar domestic content restrictions. Under the TAA and its implementation in the FAR, offers of "eligible products"53 from certain countries with which the United States has trade agreements, or which it otherwise treats as designated countries,54 are generally entitled to "receive equal consideration with domestic offers" whenever the value of the acquisition exceeds certain monetary thresholds.55
The TAA also prohibits procurement of products of non-designated countries, with certain exceptions and waivers, in acquisitions covered by the World Trade Organization (WTO) Government Procurement Agreement (GPA) whose value exceeds the relevant monetary thresholds, in order to encourage additional countries to join this agreement and provide reciprocal competitive government procurement opportunities to U.S. products and suppliers.56 The FAR implements this prohibition by requiring federal agencies to acquire only "U.S.-made or designated country end products or U.S. or designated country services" in acquisitions covered by the WTO GPA, subject to certain exceptions.57
A "substantial transformation" test is used to determine whether an end product originates in a particular country for purposes of the TAA when the product consists at least in part of materials from another country.58
Congress passed the TAA in part to implement the Government Procurement Code resulting from the Tokyo Round of international trade negotiations.59 The code contained nondiscrimination obligations with respect to government procurement similar to those now contained in the plurilateral WTO GPA.60
Currently, the WTO GPA generally requires that, whenever the value of an acquisition exceeds certain monetary thresholds, the United States grant a party's covered products, services, and suppliers national treatment—that is, treat them no less favorably than domestic goods and suppliers—with respect to all laws, regulations, procedures, and practices regarding government procurement covered by the agreement.61 The WTO GPA also contains a most-favored-nation (MFN) treatment provision that requires the United States to treat a party's covered products, services, and suppliers no less favorably than the products, services, and suppliers of any other party to the agreement with respect to all laws, regulations, procedures, and practices covered by the agreement.62 Most U.S. free trade agreements also contain some form of nondiscrimination obligation pertaining to government procurement.63 Annexes to these free trade agreements include monetary thresholds that determine when the obligations in the agreements apply to an acquisition of covered products or services by a covered entity.64
So that the United States may comply with its obligations under these trade agreements, the Office of the United States Trade Representative (USTR)65 has waived the Buy American Act for eligible products from designated countries, making these products in a sense "subject to" the TAA rather than the Buy American Act.66 Part 25 of the FAR contains a list of countries designated by the USTR. This list includes (1) parties to the WTO GPA; (2) parties to most U.S. free trade agreements; (3) certain least developed countries;67 and (4) certain Caribbean Basin countries.68
Not all products and services from particular designated countries are eligible products for purposes of the TAA, however.69 Rather, only products and services covered for procurement by specified agencies of the United States under certain trade agreements are eligible.70 Annexes to the WTO GPA and U.S. free trade agreements indicate which products and services of a particular country are covered for procurement by the United States, often by including certain products and services within the coverage of the agreement or excluding them from coverage under the agreement.71 In addition, the international obligations contained in these agreements extend only to procurements by particular entities, such as certain federal agencies, that are listed in a country's annexes.72 Thus, it appears that products and services acquired by entities not listed in the relevant annexes to free trade agreements would not be eligible products under the TAA.73
An acquisition is subject to a TAA waiver only when its value equals or exceeds certain monetary thresholds.74 These thresholds are initially established in annexes to particular trade agreements.75 However, the USTR revises the thresholds every two years and has currently set the threshold for supply contracts under the WTO GPA at $204,000 ($7.86 million for construction contracts).76 The FAR lists the monetary thresholds for each relevant trade agreement.77 It also contains instructions for calculating the estimated acquisition value.78 These instructions correspond to the rules for valuation of contracts contained in the WTO GPA.79
The TAA sets forth the test for determining whether an article originates in a particular country. Under this test,
An article is a product of a country or instrumentality only if (i) it is wholly the growth, product, or manufacture of that country or instrumentality, or (ii) in the case of an article which consists in whole or in part of materials from another country or instrumentality, it has been substantially transformed into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was so transformed.80
Thus, for a product made at least in part from materials manufactured in another country to undergo "substantial transformation," it must acquire a new name, character, or use.81
To encourage additional countries to join the WTO GPA and to provide reciprocal competitive government procurement opportunities to U.S. products and suppliers, the TAA requires the President, with regard to acquisitions covered by the WTO GPA, to prohibit procurement of the products of non-designated countries, subject to certain exceptions and waivers.82 When the value of the acquisition exceeds the relevant monetary threshold in the WTO GPA, the TAA's purchasing restriction applies.83 The purchasing restriction, as implemented in the FAR, requires federal agencies to acquire only "U.S.-made or designated country end products or U.S. or designated country services" in acquisitions covered by the WTO GPA, "unless offers for such end products or services are either not received or are insufficient to fulfill the requirements."84
Generally, a U.S.-made end product is a product "that is mined, produced, or manufactured in the United States or that is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed."85 Essentially, designated country end products are products grown, produced, manufactured, or substantially transformed in a country that is party to the WTO GPA; party to a U.S. free trade agreement that contains procurement obligations; one of certain least developed countries; or one of certain Caribbean Basin countries.86
Pursuant to Subpart 25.4 of the FAR, the TAA does not apply to certain acquisitions, including87
When an acquisition is not subject to the TAA due to one of these exceptions, the Buy American Act or another domestic preference law may apply.90
The Berry Amendment has existed since the beginning of World War II and, historically, was included in yearly defense appropriations acts. However, it became permanent law in 1993,91 and was ultimately codified at 10 U.S.C. §2533a in 2002.92 Over the years, the scope of the amendment has changed,93 though its core purposes have remained constant: safeguarding the United States' national security interests and protecting the U.S. industrial base to enable it to meet defense requirements during times of need.94
Pursuant to the Berry Amendment, DOD cannot use appropriated or otherwise available funds to purchase a covered item unless that item is entirely grown, reprocessed, reused, or produced within the United States.95 In other words, the Berry Amendment requires a higher level of domestic content than is required under the Buy American Act, which permits manufactured items to qualify as "domestic" so long they are manufactured in the United States, and (1) the cost of components mined, produced, or manufactured in the United States exceeds 50% of the cost of all components, or (2) the items are COTS items. For purposes of the Berry Amendment, covered items include food,96 clothing,97 tents,98 certain textile fabrics and fibers,99 and hand or measuring tools.100 Until 2006, the Berry Amendment also included provisions addressing specialty metals, but this language has since been codified in 10 U.S.C. §2533b,101 discussed below.
There are a number of exceptions within the Berry Amendment, permitting DOD to acquire covered items that are not entirely grown, reprocessed, reused, or produced within the United States when
Even if an acquisition is exempt from the requirements of the Berry Amendment, it is potentially subject to the Buy American Act.113 However, if the Berry Amendment applies to an acquisition, the Buy American Act does not.114
Neither the Berry Amendment nor the specialty metals restriction, discussed below, have been waived pursuant to the TAA, and certain trade agreements of the United States expressly provide that they do not apply to procurements involving textiles, clothing, food, and "speciality metals."115
The specialty metals restriction first appeared in 1972,116 when it was added to the Berry Amendment during the Vietnam War.117 It remained part of the Berry Amendment until 2006, when the National Defense Authorization Act for FY2007 took effect, and moved the specialty metals restriction from the codification of the Berry Amendment in 10 U.S.C. §2533a to a separate section of the U.S. Code, 10 U.S.C. §2533b.118
Pursuant to the specialty metals restriction, DOD cannot buy any aircraft, missile and space system, ship, tank and automotive item, weapon system, ammunition, or any components thereof, containing a specialty metal that was not melted or produced in the United States.119 Further, DOD is prohibited from purchasing, either directly or through a contractor, any specialty metal not melted or produced in the United States.120
Specialty metals include certain types of steel;121 certain metal alloys made of nickel, iron-nickel, and cobalt;122 titanium and titanium alloys;123 and zirconium and zirconium alloys.124
The specialty metals restriction contains a number of exceptions identical to those that apply to the Berry Amendment, including for purchases below the simplified acquisition threshold;125 items deemed to be "non-available;"126 acquisitions conducted outside of the United States in support of combat or contingency operations;127 acquisitions made on a noncompetitive basis due to compelling urgency;128 and items purchased for commissary resale.129 However, there are also certain exceptions that are unique to the specialty metals restriction, and permit DOD to purchase specialty metals, or specified items containing (or whose components contain) such metals, that were not melted or produced in the United States. These exceptions apply when
As with the Berry Amendment, acquisitions that are exempt from the specialty metals restrictions could potentially be subject to the Buy American Act; and the Buy American Act does not apply if the specialty metals restriction applies.137
The Buy America Act is the popular name for a group of domestic content restrictions that have been attached to funds administered by the Department of Transportation (DOT). These funds are used to make grants to states, localities, and other non-federal government entities for various transportation projects. The Buy American Act does not apply to these funds because, while the source of the money is federal, purchases are not made directly by the federal government. In other words, these purchases are not federal procurements for purposes of the Buy American Act.
The various Buy America requirements have not been waived pursuant to the TAA, and certain U.S. trade agreements expressly exclude "non-contractual agreements or ... form[s] of government assistance," such as grants, from their coverage.138
Section 313 of Title 23 of the U.S. Code prohibits the obligation of funds appropriated under Title 23 and administered by the DOT for a project "unless the steel, iron, and manufactured products used in such project are produced in the United States."139 Section 313's restriction on the use of foreign manufactured products only applies to manufactured products that consist predominantly of steel or iron (i.e., products that consist of at least 90% steel or iron content when it is delivered to the job site for installation), not all manufactured products.140 Raw materials used in the manufacturing processes may be imported.141
States expending Federal Highway Administration (FHWA) funds can satisfy the Buy America requirements by using only steel or iron produced in the United States, or including standard contract provisions that require domestic materials. Otherwise, the state may use alternate bid provisions, requiring each bidder to submit bids based on domestic materials and stating that the contract will be awarded to the bidder with the lowest total bid on domestic materials unless that bid exceeds the lowest total bid on foreign materials by more than 25%.142 Additionally, if the project includes steel and iron materials, the Buy America requirements do not prevent the minimal use of foreign steel and iron materials, not exceeding .1% of the total contract cost, or $2,500, whichever is greater.143 The FHWA is prohibited from creating funding restrictions that would prevent a state from imposing stricter Buy America requirements on projects carried out with Title 23 funds.144
The FHWA has issued nationwide waivers to the Buy America requirements for manufactured products other than steel or iron manufactured products;145 certain steel and iron materials used in ferryboat construction;146 and pig iron and processed, pelletized, and reduced iron ore.147 States may also be granted project- or material-specific waivers if the FHWA determines that applying the Buy America requirements is against public interest, or that the steel and iron materials and products needed are not produced in the United States in sufficient and reasonably available quantities of satisfactory quality.148 However, the FHWA is prohibited from issuing waivers for foreign products that come from a country that has an agreement with the United States, under which the Buy America requirements have been waived, if that country has violated the agreement in specified ways.149
Section 50101 of Title 49 of the U.S. Code prohibits the obligation of funds appropriated under certain provisions administered by the Federal Aviation Administration (FAA) for a project unless the "steel and manufactured goods used in the project are produced in the United States."150 This requirement may be waived if the FAA finds that applying the restriction is against the public interest; the necessary materials are not produced domestically in sufficient and reasonably available amounts or are not of satisfactory quality; or the use of domestic materials increases the overall project cost by more than 25%.151 Additionally, a waiver may be granted if funds available under certain provisions are used to procure a facility or equipment where the cost of components and subcomponents produced in the United States is more than 60% of the cost of all components, and the final assembly of the facility or equipment occurs in the United States.152 The FAA has issued nationwide waivers for certain commonly used products from specific manufacturers that often qualify for a waiver under the 60% domestic content provision.153 These nationwide waivers allow a product to be used in projects "without having to receive separate project waivers."154 Section 50101 does not include a prohibition on the issuance of waivers for foreign products from a country that has violated a trade agreement with the United States, as stated in other transportation-related Buy America provisions.
Funding under Chapter 53 of Title 49 of the U.S. Code, administered by the Federal Transit Administration (FTA) for public transportation projects, may be obligated for a grantee project only if the "steel, iron, and manufactured goods used in the project are produced in the United States."155 This requirement applies to all construction materials made primarily of steel or iron and used in infrastructure projects, but does not apply to steel or iron used as components or subcomponents of other manufactured products or rolling stock.156 The FTA has not specifically defined "made primarily of steel or iron."157 In order for a manufactured product to satisfy the "produced in the United States" requirement, all of the manufacturing processes must take place in the United States. Additionally, all of the product's components must be of American origin, meaning that they must be manufactured in the United States; the origin of the component's subcomponents does not matter.158 The FTA may not impose any funding limitations that restrict a state from imposing "more stringent" Buy America requirements.159
The Buy America requirements may be waived for any Chapter 53 spending if the FTA finds that applying the restriction is inconsistent with the public interest; the materials needed are not produced domestically in sufficient and reasonably available amounts or are not of satisfactory quality; or using domestic materials will increase the cost of the overall project by more than 25%.160 Additionally, a waiver may be granted when funds are used to procure rolling stock161 if the cost of the components and subcomponents produced domestically162 is more than 60% of the cost of all components of the rolling stock, and final assembly of the rolling stock occurs in the United States.163 However, the FTA is prohibited from issuing waivers for foreign goods if the foreign country has a trade agreement with the United States that waives Buy America requirements and has violated that agreement in specified ways.164
Projects funded through spending authorized under the Passenger Rail Investment and Improvement Act of 2008 (PRIIA) are subject to Buy America requirements stated in 49 U.S.C. §24405(a) if project costs exceed $100,000.165 The statute states that funds may be obligated from appropriations enacted to carry out Chapter 244 "only if the steel, iron, and manufactured goods used in the project are produced in the United States."166 Manufactured goods are considered "produced in the United States" when the manufacturing processes for the end product take place in the United States, and all of the end product's components are of domestic origin.167 The origin of a component's subcomponents is not relevant to this determination.168 The Federal Railroad Administration (FRA) may not create any funding limitations that restrict a state from imposing "more stringent" Buy America requirements on projects funded under PRIIA.169
A waiver of the Buy America requirements may be granted if applying the restrictions is inconsistent with the public interest; domestically produced steel, iron, and manufactured goods are not produced in sufficient and reasonably available amounts or are not of satisfactory quality; domestic rolling stock or power train equipment cannot be purchased and delivered within a reasonable time; or the use of domestic materials increases the cost of the overall project by more than 25%.170 The FRA is prohibited from issuing waivers for goods produced in a foreign country if that country has an agreement with the United States, under which the Buy America requirements have been waived, and has violated that agreement in specified ways.171
Amtrak has its own Buy America requirements at 49 U.S.C. §24305(f)172 that apply when the cost of articles, material, or supplies bought is at least $1 million.173 This provision requires Amtrak to buy unmanufactured articles, material, and supplies that are mined or produced in the United States; and manufactured articles, material, and supplies manufactured in the United States substantially from articles, material, and supplies that are mined, produced, or manufactured in the United States.174 The FRA175 has interpreted the "substantially from articles, material, and supplies mined, produced or manufactured in the United States" requirement to mean that the manufactured goods must have domestic component content greater than 50%, by cost.176
Amtrak may be exempted from the Section 24305 requirements if the FRA determines that the restriction is inconsistent with the public interest; the cost of imposing the restriction is unreasonable; or the necessary domestic goods are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities and are not of satisfactory quality.177 Additionally, Amtrak may receive an exemption from the Buy America requirements for rolling stock or power train equipment when those items "cannot be bought and delivered in the United States within a reasonable time."178
Amtrak may also be subject to the Buy America requirements in 49 U.S.C. §24405, discussed above, if it is operating under funds subject to those restrictions.
Table 1, below, summarizes key aspects of the four major domestic content regimes in federal law, in order to better highlight the similarities and differences among them.
|
Regime |
Agencies & Items Covered |
Basic Requirements |
Exceptions |
|
Buy American Act |
Federal agencies; procurements of supplies and construction materials whose value exceeds the micro-purchase threshold (generally $3,000) conducted in the U.S., unless TAA applies |
Unmanufactured items must be mined or produced in the U.S. Manufactured items must be manufactured in the U.S., but qualify as such if they are manufactured in the U.S., and (1) at least 50% of the cost of components is mined, produced, or manufactured in the U.S., or (2) the item is a COTS item |
Procuring domestic items is impracticable or inconsistent with the public interest; domestic items are of insufficient quantity or quality; domestic items are unreasonable in cost; the agency acquires items for commissary resale; the agency acquires IT that is a commercial item |
|
TAA |
Specified federal agencies; procurements of specified supplies, construction materials, or services valued in excess of certain monetary thresholds (e.g., $204,000 for supplies subject to the WTO GPA) |
Offers of eligible products from designated countries must be treated the same as domestic offers When the value of the acquisition exceeds the relevant threshold in the WTO GPA, products from non-designated countries cannot be procured, with certain exceptions and waivers |
Acquisitions set aside for small businesses; acquisitions of arms, ammunition, war materials, or items indispensable for national security or defense; acquisitions of end products for resale; acquisitions from Federal Prison Industries or AbilityOne; certain noncompetitive acquisitions |
|
Berry Amendment & specialty metals restriction |
Defense agencies; procurements of "covered items" or "specialty metals" valued in excess of the simplified acquisition threshold (generally $150,000), with some exceptions for purchases outside the U.S. |
Food, clothing, tents, certain textile fabrics and fibers, and hand and measuring tools must be entirely grown, reprocessed, reused, or produced in U.S. Any specialty metals used in aircrafts, missile and space systems, ships, tanks and automotive items, weapon systems, and ammunition, or components thereof, must be melted or produced in the U.S. |
Required items are not available in sufficient quantity/quality; certain noncompetitive acquisitions; acquisitions in support of combat operations or, in certain cases, contingency operations; acquisitions by vessels in foreign waters; emergency procurements and, in certain cases, procurements by establishments outside U.S. for their personnel; acquisitions of certain items for use in the production of propellants and explosives; certain acquisitions of chemical warfare protective clothing; other circumstances, particularly in the case of specialty metals |
|
Buy America |
States, localities, other non-federal government entities; procurements of iron (in certain cases), steel, or manufactured products using specified DOT grant funding |
Depending upon the restriction in question, funds may not be obligated for a funded project unless that project uses only iron, steel, and manufactured products consisting predominantly of iron and steel produced in the U.S. |
Procuring domestic items is impracticable or inconsistent with the public interest; domestic items are of insufficient quantity or quality; use of domestic materials would increase the cost of projects by specified amounts (e.g., 25% or more); the end product is assembled in the U.S. and a specified percentage (e.g., 60%) of the cost of its components are made in U.S. |
Source: Congressional Research Service, based on various sources cited in this report.
In addition to the four major domestic preference regimes previously discussed, there are also numerous other domestic content restrictions that apply in specific contexts and are intended to address perceived "gaps" left by the Buy American Act, in particular. In some cases, as with the Berry Amendment, these provisions require a higher level of domestic content than is required under the Buy American Act, which permits manufactured items to qualify as "domestic" so long as they are manufactured in the United States, and (1) the cost of components mined, produced, or manufactured in the United States exceeds 50% of the cost of all components, or (2) the items are COTS items. In other cases, as with the Buy America Act, these provisions apply to federal grants or other funds that are spent by entities that are not federal agencies, and thus not subject to the Buy American Act and other federal procurement laws. In yet other cases, the provision seeks to "encourage" procurement of domestic content by federal agencies or other entities without strictly mandating it.
Listed below are the domestic content restrictions that have been codified, including in notes, in the U.S. Code. This listing is intended to be comprehensive. However, it is important to note that un-codified provisions—such as might appear in appropriations measures—are not included.179 Provisions are given in numerical order by the Title of the U.S. Code in which they appear.
3 U.S.C. §110: Directs that all furniture purchased for the use of the Executive Residence at the White House be, "as far as practicable," of domestic manufacture.
6 U.S.C. §453b: Prohibits the Department of Homeland Security from using funds appropriated or otherwise available to it to procure covered items unless the item was grown, reprocessed, reused, or produced in the United States, with certain exceptions. Covered items include (1) articles and items of clothing, and the materials and components thereof, other than sensors, electronics, or other items added to and not normally associated with clothing; (2) tents, tarpaulins, covers, textile belts, bags, protective equipment, sleep systems, load carrying equipment, textile marine equipment, parachutes, and bandages; (3) cotton and other natural fiber products, woven silk or silk blends, spun silk yarn for cartridge cloth, synthetic fabric or coated synthetic fabric, canvas products, and wool, and (4) any item of individual equipment manufactured from or containing such fibers, yarns, fabrics, or materials.180
6 U.S.C. §612c note: Requires that Community Distribution Programs receiving certain federal funds purchase, "whenever possible," only "food products that are produced in the United States," with certain exceptions.
7 U.S.C. §903 note: Mandates that, as a condition of certain loans made for purposes of rural electrification, "to the extent practicable and the cost of which is not unreasonable," borrowers agree to use, in connection with the expenditure of borrowed funds, only (1) unmanufactured articles, materials, and supplies that have been mined or produced in the United States or an "eligible country" (i.e., a country with which the United States has certain trade agreements), or (2) manufactured articles that have been manufactured in the United States or an eligible country from articles, materials, or supplies mined, produced, or manufactured in the United States or an eligible country.
7 U.S.C. §1506(p): Expresses the sense of Congress that, "to the greatest extent practicable," all equipment and products purchased by the Federal Crop Insurance Corporation using funds available to the Corporation should be "American-made"; and that, in providing financial assistance to, or entering contracts with, entities for the purchase of equipment and products to carry out this subchapter, the Corporation, "to the greatest extent practicable," shall notify the entity of this policy.
7 U.S.C. §7012: Expresses the sense of Congress that, "to the greatest extent practicable," all equipment and products purchased using funds made available pursuant to Chapter 98 of Title 7—which addresses the Consolidated Farm Service Agency, the Rural Utilities Service, the Rural Business and Cooperative Development Service, and the Rural Development Disaster Assistance Fund—should be "American-made"; and that, in providing financial assistance to, or entering contracts with, entities for the purchase of equipment and products to carry out this subchapter, the Secretary of Agriculture, "to the greatest extent practicable," shall notify the entity of this policy.
10 U.S.C. §2303 note: Requires the Secretary of Defense to "encourag[e] increased domestic breeding," while ensuring that military working dogs are procured as efficiently as possible and at best value to the government.
10 U.S.C. §2436: Directs the Secretary of Defense to plan and establish an "incentive program" for contractors to purchase capital assets manufactured in the United States, in part with funds made available to DOD.
10 U.S.C. §2534: Prohibits DOD from procuring sonobuoys manufactured in a foreign country if U.S. firms that manufacture sonobuoys are not permitted to compete on an equal basis with foreign manufacturing firms for the sale of sonobuoys in that country, with certain exceptions.
10 U.S.C. §2534 note: Mandates that DOD incorporate clauses in its energy savings performance contracts, utility service contracts, land leases, and private housing contracts which require that any photovoltaic devices to be (1) installed on DOD property or in a facility owned by DOD, and (2) reserved for the "exclusive use" of DOD for their full economic life, comply with the Buy American Act.
10 U.S.C. §7291: Requires that any vessels constructed or converted under a program for the construction and conversion of cargo vessels incorporating features "essential for military use" incorporate (1) propulsion systems whose "main components (that is, the engines, reduction gears, and propellers)" are manufactured in the United States; and (2) bridge, machinery control systems, and interior communications equipment that are manufactured in the United States and have more than 50% of their value, in terms of cost, added in the United States, with certain exceptions.
12 U.S.C. §1735e-1: Directs the Secretary of Housing and Urban Development to encourage the use of materials and products mined and produced in the United States in the administration of housing programs.
14 U.S.C. §97: Prohibits the Coast Guard from procuring buoy chain that is not manufactured in the United States, or substantially all the components of which are not produced or manufactured in the United States, unless the price of buoy chain manufactured in the United States is "unreasonable" or emergency circumstances exist.
15 U.S.C. §631 note; 15 U.S.C. §661 note: Requires the Administrator of Small Business, when providing financial assistance with amounts appropriated pursuant to certain amendments made to the Small Business Act in 1992, "when practicable," to give preference to small businesses which use or purchase equipment and supplies produced in the United States, and to encourage small businesses receiving assistance to purchase such equipment and supplies.
15 U.S.C. §2221(l): Requires that the recipients of arson prevention grants under Chapter 49 (Fire Prevention and Control) of Title 15 purchase, when available and cost-effective, American-made equipment and products when expending grant funds.
20 U.S.C. §6067: Expresses the sense of Congress that no funds appropriated pursuant to Chapter 68 (National Education Reform) of Title 20 are to be expended by an entity unless the entity agrees to comply with the Buy American Act in expending the funds, and to purchase only "American-made equipment and products" in the case of any equipment or products that may be authorized to be purchased with financial assistance provided under Chapter 68.
20 U.S.C. §9275: Prohibits the use of certain adult education funds made available under Titles I-III of Subchapter II of Chapter 73 (Adult Education and Literacy) of Title 20 from being expended by an entity unless that entity agrees to comply with the Buy American Act in expending the funds; and expresses the sense of Congress that, in the case of any equipment or product authorized to be purchased with financial assistance provided using funds made available under these Titles, the entities receiving the assistance should purchase only American-made equipment and products in expending the assistance.
22 U.S.C. §2354: Imposes a number of restrictions on procurements made outside the United States involving foreign assistance funds. Among other things, (1) funds may not be used to purchase, in bulk, any commodities at prices higher than the market price prevailing in the United States at the time of purchase (adjusted for differences in the cost of transportation to destination, quality, and terms of payment); (2) agricultural commodities or products available for distribution under the Food for Peace Act shall, "insofar as practicable," be procured within the United States unless such items are not available in the United States in sufficient quantities to supply emergency requirements of recipients; (3) commodities procured must generally be insured in the United States against marine risk with companies authorized to do a marine insurance business in any State of the United States; (4) funds made available under Chapter 32 of Title 22 may not be used to procure any agricultural commodity, or product thereof, outside the United States when the domestic price of such commodity is less than parity, with certain exceptions; and (5) funds may not be used to procure construction or engineering services from "advanced developing countries" which have attained a "competitive capability" in international markets for construction services or engineering services.
24 U.S.C. §225h: Requires the District of Columbia to comply with the Buy American Act in all procurements made under Subchapter III (Mental Health Service for the District of Columbia) of Chapter 4 of Title 24; and prohibits the award of contracts or subcontracts made with funds authorized under this Subchapter for the procurement of articles, materials, or supplies produced in countries whose government unfairly maintains in government procurement a "significant and persistent pattern or practice of discrimination" against U.S. products and services that results in identifiable harm to U.S. businesses.181
25 U.S.C. §1638b: Requires that all procurements conducted with funds made available to carry out Subchapter III (Health Facilities) of Chapter 18 (Indian Health Care) of Title 25 comply with the Buy American Act.
31 U.S.C. §5111: Requires that the Secretary of the Treasury, in order to protect the national security through domestic control of the coinage process, acquire only articles, materials, supplies, and services for the production of coins that have been produced or manufactured in the United States, unless the Secretary (1) determines that doing so would be inconsistent with the public interest, or the cost is unreasonable, and (2) publishes a written notice stating the basis for this determination in the Federal Register.
31 U.S.C. §5114: Requires that articles, materials, and supplies procured for use in the production of currency, postage stamps, and other security documents for foreign governments be treated "in the same manner" as articles, materials, and supplies procured for public use within the United States under the Buy American Act.
31 U.S.C. §5114 note: Provides that none of the funds made available by the Treasury, Postal Service, and General Government Appropriations Act, 1989 (P.L. 100-440), or any other act with respect to any fiscal year, may be used to contract for the manufacture of "distinctive paper" for U.S. currency and securities pursuant to 31 U.S.C. §5114 outside the United States or its possessions, with certain exceptions.
33 U.S.C. §1295: Prohibits the award of grants for the construction of water treatment works under Subchapter II (Grants for the Construction of Treatment Works) of Chapter 26 (Water Pollution Prevention and Control) of Title 33 unless only (1) unmanufactured articles, materials, supplies that have been mined or produced in the United States, and (2) manufactured articles, materials and supplies that have been manufactured in the United States "substantially all" from articles, materials, or supplies mined, produced, or manufactured in the United States, are used, with certain exceptions.
33 U.S.C. §2201 note: Expresses the sense of Congress that, "to the extent practicable," all equipment and products purchased with certain funds made available for water resources development be "American made."
38 U.S.C. §2301(h): Prohibits the Department of Veterans Affairs from procuring any burial flags that are not "wholly produced in the United States," unless the Secretary determines this requirement cannot reasonably be met, or that compliance with the requirement would not be in the national interest of the United States.
40 U.S.C. §3313: Requires that procurements carried out pursuant to this section (i.e., procurements promoting the use of energy-efficient lighting fixtures and bulbs in public buildings) comply with the Buy American Act.
42 U.S.C. §1760: Requires, with certain exceptions, that school food authorities participating in the National School Lunch Program purchase, "to the maximum extent practicable," "domestic commodities or products" (i.e. agricultural commodities produced in the United States, and food products processed in the United States "substantially using" agricultural commodities that are produced in the United States).
42 U.S.C. §5206: Prohibits the expenditure of funds appropriated under the Disaster Mitigation Act of 2000, or any amendment made by the act, by any entity unless that entity complies with the Buy American Act in expending the funds.
42 U.S.C. §6374: Requires that "preference" be given to vehicles that operate on alternative fuels derived from domestic sources when considering which types of alternative fuel vehicles to acquire in implementing the statutory requirement that "the maximum number practicable" of vehicles acquired annually for use by the federal government be alternative fueled vehicles.
42 U.S.C. §6705: Prohibits the award of grants under Chapter 80 (Local Public Works Employment) of Title 42 for local public works projects unless the project uses only (1) unmanufactured articles, materials, or supplies mined or produced in the United States, and (2) manufactured articles, materials, and supplies manufactured in the United States "substantially all" from articles, materials, and supplies mined, produced, or manufactured in the United States, with certain exceptions.
42 U.S.C. §13316: Requires that the U.S. Agency for International Development (USAID), in selecting projects for the renewable energy technology transfer program, consider, among other things, the degree to which the equipment to be included in the project is designed and manufactured in the United States; and ensure that, in carrying out projects, the "maximum percentage"—but in no case less than 50%—of the cost of any equipment furnished in connection with the project shall be attributable to the manufactured U.S. components of such equipment, as well as the "maximum participation" of U.S. firms.
42 U.S.C. §13362: Requires that USAID, in selecting projects for the innovative clean coal technology transfer program, consider, among other things, the degree to which the equipment to be included in the project is designed and manufactured in the United States; and ensure that, in carrying out projects, the "maximum percentage"—but in no case less than 50%—of the cost of any equipment furnished in connection with the project shall be attributable to the manufactured U.S. components of such equipment, as well as the "maximum participation" of U.S. firms.
42 U.S.C. §13387: Requires that USAID, in selecting projects for the innovative environmental technology transfer program, consider, among other things, the degree to which the equipment to be included in the project is designed and manufactured in the United States; and ensure that, in carrying out projects, the "maximum percentage"—but in no case less than 50%—of the cost of any equipment furnished in connection with the project shall be attributable to the manufactured U.S. components of such equipment, as well as the "maximum participation" of U.S. firms.
42 U.S.C. §16312: Requires that any agreement for U.S. participation in the International Thermonuclear Experimental Reactor (ITER) shall, at a minimum, ensure that the share of high-technology components of the ITER manufactured in the United States is "at least proportionate" to the U.S. financial contribution to the ITER, among other things.
42 U.S.C. §17353: Requires that International Clean Energy Foundation promote the use of American-made clean and energy efficient technologies, process, and services by giving preference to entities incorporated in the United States, or whose technology will be "substantially manufactured" in the United States, when making grants to promote projects outside the United States.
Acknowledgments
An earlier report on this topic, R42501, Domestic Content Legislation: The Buy American Act and Complementary Little Buy American Provisions, was authored by former CRS attorney [author name scrubbed].
|
Area of Expertise |
Name |
Phone |
|
|
Buy American Act |
[author name scrubbed] |
[phone number scrubbed] |
[email address scrubbed] |
|
Trade Agreements Act |
[author name scrubbed] |
[phone number scrubbed] |
[email address scrubbed] |
|
Berry Amendment and specialty metals restriction |
[author name scrubbed] |
[phone number scrubbed] |
[email address scrubbed] |
|
Buy America Act |
[author name scrubbed] |
[phone number scrubbed] |
[email address scrubbed] |
| 1. |
In a few cases, these restrictions also apply to other funds available to federal agencies. See, e.g., 10 U.S.C. §2533a (generally prohibiting the use of funds appropriated or otherwise available to the Department of Defense (DOD) for the procurement of certain items unless the item is grown, reprocessed, reused, or produced in the United States). |
| 2. |
U.S. Const., Art. 1, §8, cl. 1 ("The Congress shall have Power To lay and collect Taxes, Duties, Imposts and Excises, to pay the Debts and provide for the common Defence and general Welfare of the United States; but all Duties, Imposts and Excises shall be uniform throughout the United States."). |
| 3. |
See generally Dana Frank, Buy American: The Untold Story of Economic Nationalism 56-57 (1998). |
| 4. |
See 19 U.S.C. §2511(a) (authorizing the President to waive "the application of any law, regulation, procedure, or practice regarding Government procurement" that would discriminate against eligible products and suppliers from designated countries). |
| 5. |
See, e.g., American Recovery and Reinvestment Act, P.L. 111-5, §1605(d), 123 Stat. 303 (Feb. 17, 2009) (providing that certain domestic content restrictions imposed by the act are to be "applied in a manner consistent with United States obligations under international agreements"). |
| 6. |
Cf. CRS Report RL33944, Trade Primer: Qs and As on Trade Concepts, Performance, and Policy, coordinated by [author name scrubbed] ("Economic theory indicates that trade occurs because it is mutually enriching. ... By allowing each participant to specialize in producing what it is relatively more efficient at and trading for what it is relatively less efficient at, trade can increase economic well-being above what would be possible without trade."). |
| 7. |
See infra "Other Provisions." |
| 8. |
This report supersedes an earlier report on this topic, CRS Report R42501, Domestic Content Legislation: The Buy American Act and Complementary Little Buy American Provisions. |
| 9. |
See, e.g., Cal. Gov't Code §4304 ("Every contract for the construction, alteration or repair of public works or for the purchase of materials for public use shall contain a provision that only unmanufactured materials produced in the United States, and only manufactured materials manufactured in the United States, substantially all from materials produced in the United States shall be used in the performance of the contract."). Some states and localities also have measures that promote the purchase of state or local products. |
| 10. |
The Federal Trade Commission (FTC) regulates use of the "Made in the USA" designation. See FTC, Bureau of Consumer Protection, Made in USA, available at http://www.business.ftc.gov/advertising-and-marketing/made-usa. Federal law does not require the purchase of supplies bearing the "Made in the USA" designation, per se, although it may require the purchase of supplies that are produced or manufactured in the United States, and entities found to have intentionally affixed a "Made in America" or similar designation on an ineligible product that was sold in or shipped to the United States may be debarred from certain federal contracts. See, e.g., 15 U.S.C. §1536 (debarment from Department of Commerce contracts). |
| 11. |
Cf. Military Optics, Inc., B-245010.3; B-245010.4 (Jan. 16, 1992) ("The fact that the manufacturer of a domestically manufactured end product may be foreign owned is not a factor to be considered in determining whether to apply the Buy American Act differential."). |
| 12. |
See, e.g., 10 U.S.C. §2534 (requiring DOD, with certain exceptions, to purchase buses, chemical weapons antidotes, certain components for naval vessels, certain valves and machine tools, and certain ball bearings from manufacturers that are part of the U.S. technology and industrial base); 10 U.S.C. §2536 (prohibiting the award of DOD or Department of Energy contracts under a national security program to entities controlled by foreign governments if that entity would need to be given access to information in a proscribed category of information in order to perform the contract); 22 U.S.C. §4864(c) (requiring the Secretary of State to ensure that U.S. diplomatic and consular posts assist U.S. firms in obtaining local licenses and permits to perform certain local guard contracts for foreign service buildings); 42 U.S.C. §1870a (requiring that the National Science Foundation, "to the maximum extent practicable and consistent with current law," award to "domestic firms" any contracts for the purchase of goods or services intended for direct use by the Foundation); 49 U.S.C. §50103 (contract preference for domestic firms). |
| 13. |
Act of March 3, 1933, 47 Stat. 1520 (codified, as amended, at 41 U.S.C. §§8301-8305). For a more detailed discussion of the Buy American Act, see CRS Report R43140, The Buy American Act in Brief: Preferences for "Domestic" Supplies and Construction Materials in Federal Procurements, by [author name scrubbed]. |
| 14. |
Although the Buy American Act uses the word "purchase" in certain places, it has been found to apply to leases of supplies on the basis that "it would be unreasonable to presume that Congress intended to narrow the protection afforded to American manufacturers by allowing the lease of foreign-made products where the purchase of such products is prohibited." Postmaster General, B-156082 (May 1, 1967). |
| 15. |
41 U.S.C. §8302(a)(1). See also 41 U.S.C. §8303(a)(1)-(2) ("Every contract for the construction, alteration, or repair of any public building or public work in the United States shall contain a provision that in the performance of the work the contractor, subcontractors, material men, or suppliers shall use only (1) unmanufactured articles, materials, and supplies that have been mined or produced in the United States ..."). |
| 16. |
Executive Order 10582, implementing the Buy American Act, authorizes agencies to reject foreign offers that would have an "adverse effect" on the public interest. See, e.g., Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act, 19 Fed. Reg. 8723 (Dec. 21, 1954) ("Nothing in this order shall affect the authority or responsibility of an executive agency ... [t]o reject any bid or offer for reasons of the national interest not described or referred to in this order."). However, other than as authorized by this order, agencies generally cannot reject what would otherwise be the low offer on the grounds that it is foreign. See Viking Supply Corp., B-150091 (Jan. 17, 1963). |
| 17. |
48 C.F.R. §25.105. Which offer represents the "best value" for the government is determined based on various factors established by the government and incorporated into the solicitation for the contract. See 48 C.F.R. §15.101 (best value); 48 C.F.R. §15.304 (evaluation factors). Cost or price must be among these factors, but it need not be the primary factor or carry any specific weight in the overall award. 48 C.F.R. §15.304(c)(1). Other factors may include contractors' compliance with the solicitation requirements, technical excellence, management capability, personnel qualifications, prior experience, and small-business status. 48 C.F.R. §15.304(c)(2). |
| 18. |
48 C.F.R. §25.105(b)(1). |
| 19. |
48 C.F.R. §25.105(b)(2). But see Puget Sound Pipe & Supply Co., B-164396 (Aug. 5, 1968) (finding that, although the lowest domestic offer was from a small business, the 6% factor applied because the small business did not offer the products of a small business). |
| 20. |
48 C.F.R. §225.105 ("Use an evaluation factor of 50 percent instead of the factors specified in FAR 25.105(b)."). |
| 21. |
48 C.F.R. §25.105(a)(1). See also Concrete Tech., Inc., B-202407 (Oct. 27, 1981) (agencies may adopt higher percentages by regulation); General Elec. Co., B-152470 (Feb. 14, 1964) (same). |
| 22. |
See, e.g., Yohar Supply Co., B-225480 (Feb. 11, 1987) ("[T]he Buy American Act ... does not prohibit the purchase of foreign source end items."); Paulsen-Webber Cordage Corp., B-140904 (Dec. 11, 1959) (upholding the purchase of foreign end products where the price of the domestic products was 36% higher than the price of the foreign ones). |
| 23. |
41 U.S.C. §8302(a)(1); 48 C.F.R. §25.101(a). The Buy American Act itself refers to items "manufactured in the United States substantially all from articles, materials, or supplies mined, produced, or manufactured in the United States." See 41 U.S.C. §8302(a) (emphasis added). However, the executive branch has long construed "substantially all" to mean at least 50%, and this interpretation has been upheld as within the executive branch's discretion. See, e.g., Allis-Chalmers Mfg. Co., B-147210 (Nov. 27, 1961). |
| 24. |
48 C.F.R. §25.003. |
| 25. |
Id. (definition of domestic end product). |
| 26. |
Id. For purposes of the FAR, COTS items generally include any items of supply (including construction material) that are (1) "commercial items"; (2) sold in substantial quantities in the commercial marketplace; and (3) offered to the government without modification, in the same form in which they are sold in the commercial marketplace. 48 C.F.R. §2.101. Commercial items are items of a type customarily used by the general public or by non-governmental entities for purposes other than governmental purposes that have been sold, leased, or licensed to the general public, or offered for sale, lease, or license to the general public. Id. |
| 27. |
See especially Executive Order 10582, 19 Fed. Reg. 8723 (Dec. 21, 1954). |
| 28. |
See, e.g., A. Hirsch, Inc., B-237466 (Feb. 28, 1990) ("The concept of what precisely constitutes 'manufacturing' for the purpose of the Act remains largely undefined; accordingly we have noted in our decisions in this area that each involves a peculiar factual situation and at best only provides conceptual guidance in determining whether a given set of operations constitutes manufacturing."). |
| 29. |
Id. But see A&D Machinery Co., B-242546; B-242547 (May 16, 1991) (stating that the test is not whether a foreign product has been significantly altered in the United States, but whether the item being procured is made suitable for its intended use, and its identity is established, in the United States). |
| 30. |
See, e.g., Cincinnati Elec. Corp., B-185842 (Sept. 27, 1976). |
| 31. |
See, e.g., Valentec Wells, Inc., ASBCA 41659, 91-3 B.C.A. ¶ 24,168 (1991); DynAmerica, Inc., B-248237 (Sept. 28, 1992). |
| 32. |
See, e.g., Marbex, Inc., B-225799 (May 4, 1987). |
| 33. |
48 C.F.R. §25.003. This includes any "mark-ups" by middlemen. See Lyntronics, Inc., B-195268 (Dec. 21, 1979). |
| 34. |
Costs are generally allocable to a government contract if they (1) are incurred specifically for the contract; (2) benefit both the contract and other work, and can be distributed to each in reasonable proportion to the benefits; or (3) are necessary to the overall operation of the business, even if a direct relationship to any particular cost objective cannot be shown. See generally 48 C.F.R. §31.201-4. |
| 35. |
48 C.F.R. §25.003. |
| 36. |
See id. (defining component as any "article, material, or supply incorporated directly into an end product or construction material"). In practice, determining whether an item is an end product, or a component of an end product, can be complicated, particularly when the agency seeks to acquire some sort of "system." See, e.g., MRI Sys., Corp., B-184785 (Nov. 19, 1976) (computer software system); Thomas J. Valentino, Inc., B-156768 (Aug. 17, 1965) (music background library); Data Transformation Corp., GSBCA 89082-P, 87-3 B.C.A. ¶20,017 (1987) (automatic data processing system). However, judicial and other tribunals often look to the purpose and structure of the procurement in making such determinations. See, e.g., Ampex Corp., B-203021 (Feb. 24, 1982) (finding that two videotape recorder/reproducer systems were not end products because the solicitation for each system contained 15 line items, each of which could be viewed as an end product). |
| 37. |
41 U.S.C. §8303(a)(1)-(2); 48 C.F.R. §25.202(a). |
| 38. |
48 C.F.R. §25.003. However, "emergency life safety systems" (e.g., emergency lighting, fire alarms) that are discrete systems which are incorporated into a public building or work and are produced as complete systems, are evaluated as single and discrete construction material regardless of when or how the individual parts or components are delivered to the construction site. Id. |
| 39. |
Id. |
| 40. |
Id. |
| 41. | |
| 42. |
41 U.S.C. §8302(a) (supplies); 41 U.S.C. §8303(b)(2) (construction); 48 C.F.R. §25.103(a). The "public interest" prong of this exception encompasses agency agreements with foreign governments that provide for the purchase of foreign end products or construction materials, as well as ad hoc determinations that application of the act's restrictions would not be in the public interest. See also 10 U.S.C. §2533 (prescribing that defense agencies take certain factors into account when determining whether application of the Buy American Act is inconsistent with the public interest). |
| 43. |
48 C.F.R. §25.103(b). See also 41 U.S.C. §8302(a)(2)(B) (supplies); 41 U.S.C. §8303(b)(1)(B) (construction). In some cases, the government has made a determination that particular classes of products are nonavailable. See generally 48 C.F.R. §25.104(a). In other cases, the head of the contracting agency determines that goods which are not subject to class determinations are nonavailable. 48 C.F.R. §25.103(b)(2). |
| 44. |
48 C.F.R. §25.103(d). |
| 45. |
48 C.F.R. §25.103 (exceptions for supply contracts); 48 C.F.R. §25.202 (exceptions for construction contracts). |
| 46. |
See supra note 26 for the definition of commercial item. |
| 47. |
See, e.g., 9-50 Gov't Conts.: Law, Admin. & Proc. §50.60[1] (listing "products ... to be used outside the United States" and "goods ... procured under an award with a value less than the 'micro-purchase threshold'" as exceptions to the Buy American Act). The micro-purchase threshold may be lower, or higher, than $3,000, depending upon the circumstances of the procurement. See 48 C.F.R. §2.101. |
| 48. |
48 C.F.R. §§25.203, 25.205. Contractors are, however, generally not legally entitled to a determination that an exception applies. See, e.g., Two State Constr. Co., DOTCAB 78-31 (1981). |
| 49. |
See 48 C.F.R. §25.402(b). |
| 50. |
See 48 C.F.R. §25.401(b). Supplies or services are essentially excluded from the coverage of particular trade agreements if the federal agency purchasing the supplies or services is not a covered entity under the agreement. See 19 U.S.C. §2518(4)(A); e.g., WTO GPA, United States Appendix I, Annex 1; id. at Annex 4; U.S.-Panama Trade Promotion Agreement, Chapter 9, Annex 9.1. |
| 51. |
See 48 C.F.R. §25.401(a). These exceptions are discussed further, infra, notes 88 and 89 and accompanying text. |
| 52. |
19 U.S.C. §2511(a); 48 C.F.R. §25.404 (stating that least developed country end products, construction materials, and services must be treated as eligible products for acquisitions subject to the WTO GPA); 48 C.F.R. §25.405 (providing that Caribbean Basin country end products, construction material, and services must be treated as eligible products for acquisitions subject to the WTO GPA); see also, e.g., WTO GPA, Art. III; U.S.-Oman Free Trade Agreement, Art. 9.2. There are other statutory provisions that also permit waiver of the Buy American Act or domestic preferences. See, e.g., 10 U.S.C. §2350b (permitting waiver in the context of the acquisition of defense equipment for cooperative projects under the Arms Export Control Act); 10 U.S.C. §2457(e) (authorizing the Secretary of Defense to waive, as inconsistent with the public interest, the requirements of the Buy American Act if it is determined that the procurement of equipment manufactured outside the United States is necessary to carry out the standardization of equipment with North Atlantic Treaty Organization members); 22 U.S.C. §2603 (authorizing waivers of the Buy American Act in the context of migration and refugee assistance). |
| 53. |
An eligible product is "a foreign end product, construction material, or service that, due to applicability of a trade agreement to a particular acquisition, is not subject to discriminatory treatment." 48 C.F.R. §25.003. |
| 54. |
Some of the designated countries that are "Caribbean Basin countries" or "least developed countries" have not entered into trade agreements with the United States. See 48 C.F.R. §25.003 (listing these least developed and Caribbean Basin countries under the definition of designated country). |
| 55. |
19 U.S.C. §2511; 48 C.F.R. §25.402(a)(1), (b). |
| 56. |
19 U.S.C. §2512(a), (b); 48 C.F.R. §25.403(c). |
| 57. |
48 C.F.R. §25.403(c) |
| 58. |
19 U.S.C. §2518(4)(B); 48 C.F.R. §25.001(c). |
| 59. |
19 U.S.C. §§2511-18; Tokyo Round Government Procurement Code, available at http://www.worldtradelaw.net/tokyoround/procurementcode.pdf. |
| 60. |
WTO GPA, Art. III, available at http://www.wto.org/english/docs_e/legal_e/gpr-94_01_e.htm. On March 30, 2012, the parties to the WTO GPA adopted a new version of the agreement intended to bring it into conformity with current procurement practices and update the list of procurements covered by the agreement. The revised WTO GPA will enter into force for the countries that have accepted it 30 days after two-thirds of the parties to the original WTO GPA have deposited their instruments of acceptance. USTR, WTO Government Procurement Agreement, available at http://www.ustr.gov/trade-topics/government-procurement/wto-government-procurement-agreement. |
| 61. |
WTO GPA, Art. III. |
| 62. |
Id. |
| 63. |
See, e.g., U.S.-Oman Free Trade Agreement, Art. 9.2. Some U.S. free trade agreements, such as the North American Free Trade Agreement (NAFTA), contain MFN provisions. NAFTA Art. 1003. |
| 64. |
See, e.g., U.S.-Peru Trade Promotion Agreement, Annex 9.1. |
| 65. |
The President has delegated the authority to designate countries and make the required determinations under section 301 of the TAA to the USTR. Executive Order 12260, at §1-201, 46 Fed. Reg. 1653 (Dec. 31, 1980). The USTR makes each designation, and, if necessary, the required determinations, and publishes them in the Federal Register. See, e.g., USTR, Determination Regarding Waiver of Discriminatory Purchasing Requirements with Respect to Goods and Services Covered by Chapter Nine of the United States-Panama Trade Promotion Agreement, 77 Fed. Reg. 65603 (Oct. 29, 2012). |
| 66. |
48 C.F.R. §25.402(a)(1). None of the relevant exceptions contained in the FAR, discussed below, must apply to the acquisition. See "Exceptions to the TAA" (discussing certain exceptions, such as acquisition set-aside for small businesses, provided for in 48 C.F.R. §25.401(a)). |
| 67. |
The term least developed countries includes "any country on the United Nations (UN) General Assembly list of least developed countries." 19 U.S.C. §2518(6). Initially, UN applied this designation to countries with low per capita gross domestic product (GDP) and structural impediments to growth. However, since 2011, the designation has been used to describe countries that "suffer[]from the most severe structural impediments to sustainable development." See UN Dev. Policy and Analysis Division, LDC Information: The Criteria for Identifying Least Developed Countries: Overview, Aug. 2013, available at http://www.un.org/en/development/desa/policy/cdp/ldc/ldc_criteria.shtml. |
| 68. |
48 C.F.R. §25.003 (defining designated country). The USTR has waived the Buy American Act for eligible products from "least developed countries" and Caribbean Basin countries to accomplish certain other goals. 48 C.F.R. §§25.402(a)(1), 25.404, 25.405. For example, the Caribbean Basin Initiative "provides beneficiary countries with duty-free access to the U.S. market for most goods" to help with the development of their economies. USTR, Caribbean Basin Initiative, available at http://www.ustr.gov/trade-topics/trade-development/preference-programs/caribbean-basin-initiative-cbi. |
| 69. |
19 U.S.C. §2518(4)(A) (defining eligible product). Certain end products, construction material, and services from "least developed" or "Caribbean Basin" countries are eligible products under the TAA for acquisitions covered by the WTO GPA. 48 C.F.R. §§25.404, 25.405. |
| 70. |
19 U.S.C. §2518(4)(A) (defining eligible product); 48 C.F.R. §25.003 (same). |
| 71. |
See, e.g., WTO GPA, United States Appendix I, Annex 1; id. at Annex 4; U.S.-Panama Trade Promotion Agreement, Chapter 9, Annex 9.1. |
| 72. |
See, e.g., WTO GPA, United States Appendix I, Annex 1; id. at Annex 4; U.S.-Panama Trade Promotion Agreement, Chapter 9, Annex 9.1. |
| 73. |
See 19 U.S.C. §2518(4)(A). |
| 74. |
48 C.F.R. §§25.402(b), 25.403(c). For designated countries that are least developed countries or Caribbean Basin countries, the relevant monetary threshold is provided in the WTO GPA. 48 C.F.R. §§25.404, 25.405. |
| 75. |
See, e.g., WTO GPA, United States Appendix I, Annex 1 (establishing monetary thresholds for procurements of supplies and construction services). |
| 76. |
48 C.F.R. §25.402(b). |
| 77. |
Id. |
| 78. |
48 C.F.R. §25.403(b). |
| 79. |
WTO GPA, Art. II. |
| 80. |
19 U.S.C. §2518(4)(B). |
| 81. |
48 C.F.R. §25.001(c); CSK Int'l, Inc., B-278111.2 (Dec. 30, 1997) (attachment of a pulaski tool head together with its wooden handle did not result in a substantial transformation). |
| 82. |
19 U.S.C. §2512. |
| 83. |
48 C.F.R. §25.403(c). |
| 84. |
Id. |
| 85. |
48 C.F.R. §25.003 (defining U.S.-made end product). |
| 86. |
Id. (defining designated country end product). |
| 87. |
48 C.F.R. §25.401(a). |
| 88. |
A set-aside is an acquisition in which only small businesses may compete. See generally CRS Report R42981, Set-Asides for Small Businesses: Legal Requirements and Issues, by [author name scrubbed] and [author name scrubbed]. |
| 89. |
48 C.F.R. §25.401(a). Subparts 6.2 and 6.3 of the FAR, respectively, discuss (1) full and open competition after the exclusion of sources, and (2) other than full and open competition. Section 13.501 discusses the special documentation requirements pertaining to the commercial item test program. This program authorizes the use of the "simplified" procedures normally used for "small purchases" (generally $30,000 to $150,000) in purchases valued at up to $6.5 million ($12 million in certain circumstances). |
| 90. |
See Puerto Rico Marine Mgmt., Inc., B-247975.5 (Oct. 23, 1992). |
| 91. |
Department of Defense Appropriations Act, 1994, P.L. 103-139, §8005, 107 Stat. 1488 (Nov. 11, 1993). The Berry Amendment was initially codified at 10 U.S.C. §2241 note. Id. |
| 92. |
National Defense Authorization Act for FY2002, P.L. 107-107, §832, 115 Stat. 1189 (Dec. 28, 2001). |
| 93. |
In its original incarnation, the Berry Amendment ensured only that troops' uniforms were wholly manufactured in the United States and that their food was wholly grown and produced in the United States. See Fifth Supplemental National Defense Appropriations Act, P.L. 77-29, 55 Stat. 125 (Apr. 5, 1941). Over time, other items were added. |
| 94. |
See U.S. Gov't Accountability Office, Defense Acquisition: Rationale for Imposing Domestic Source Restrictions, GAO/NSIAD-98-191, at pg. 1 (1998). |
| 95. |
10 U.S.C. §2533a(a). |
| 96. |
10 U.S.C. §2533a(b)(1)(A). |
| 97. |
10 U.S.C. §2533a(b)(1)(B). Clothing includes any materials or components of clothing, excluding sensors, electronics, or other items that are added to, but not normally associated with, clothing. Id. |
| 98. |
10 U.S.C. §2533a(b)(1)(C). Tents include any structural components of tents, along with tarpaulins and covers. Id. |
| 99. |
10 U.S.C. §2533a(b)(1)(D). Covered textile fabrics and fibers include cotton and other natural fiber products, woven silk or silk blends, spun silk yarn for cartridge cloth, synthetic fabrics, coated synthetic fabrics, canvas products, and wool. Id. Items of individual equipment manufactured from or containing such fibers, yarns, fabrics, or materials are also expressly included. 10 U.S.C. §2533a(b)(1)(E). |
| 100. |
10 U.S.C. §2533a(b)(2). |
| 101. |
The domestic source requirements applicable to specialty metals were relocated by the John Warner National Defense Authorization Act for FY2007. P.L. 109-364, §842, 120 Stat. 2335 (Oct. 17, 2006). |
| 102. |
10 U.S.C. §2533a(c). Under the Defense Federal Acquisition Regulation Supplement, other officials authorized to make nonavailability determinations include the Under Secretary of Defense and the Director of the Defense Logistics Agency. 48 C.F.R. §225.7002-2(b)(1). Any nonavailability determination must be supported by documentation that analyzes alternatives that would not require a domestic nonavailability determination and certifies, in writing and with specificity, why such alternatives are unacceptable. 48 C.F.R. §225.7002-2(b)(2)(i),(ii). |
| 103. |
10 U.S.C. §2533a(h). See 48 C.F.R. §2.101 (simplified acquisition threshold may exceed $150,000 in certain circumstances, e.g., acquisitions of supplies or services to be used to support contingency operations or to facilitate defense against or recovery from nuclear, biological, chemical, or radiological attack). |
| 104. |
10 U.S.C. §2533a(d)(1). |
| 105. |
10 U.S.C. §2533a(d)(4). |
| 106. |
10 U.S.C. §2533a(d)(2). |
| 107. |
10 U.S.C. §2533a(d)(3). |
| 108. |
10 U.S.C. §2533a(g). |
| 109. |
10 U.S.C. §2533a note. |
| 110. |
10 U.S.C. §2533a(f)(1). |
| 111. |
10 U.S.C. §2533a(f)(2). |
| 112. |
10 U.S.C. §2533a(e). |
| 113. |
10 U.S.C. §225.7000(b) ("Nothing in this subpart affects the applicability of the Buy American statute."). |
| 114. |
See id. |
| 115. |
See, e.g., WTO GPA, United States Appendix I, Annex 1 (specifying that the WTO GPA does not apply to purchases of the Department of Defense involving (1) Federal Supply Classification (FSC) 83 (textiles) (other than pins, needles, sewing kits, flagstaffs, flagpoles, and flagstaff trucks); (2) FSC 83 (clothing and individual equipment) (other than luggage); (3) FSC 89 (food) (other than tobacco products); and (4) "speciality metals," among other things). |
| 116. |
Department of Defense Appropriations Act, 1973, P.L. 92-570, §742, 86 Stat. 1200 (Oct. 26, 1972). |
| 117. |
See CRS Report RL33751, The Specialty Metal Clause: Oversight Issues and Options for Congress, by [author name scrubbed], at pg. 1. |
| 118. |
P.L. 109-364, §842(a). |
| 119. |
10 U.S.C. §2533b(a)(1). |
| 120. |
10 U.S.C. §2533b(a)(2). |
| 121. |
10 U.S.C. §2533b(l)(1). The specialty metals restriction applies to steel "with a maximum alloy content exceeding one or more of the following limits: manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent" or "containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, columbium, molybdenum, nickel, titanium, tungsten, or vanadium." Id. |
| 122. |
10 U.S.C. §2533b(l)(2). The specialty metals restriction applies to nickel, iron-nickel, and cobalt base metal alloys only if they contain "a total of other alloying metals (except iron) in excess of 10 percent." Id. |
| 123. |
10 U.S.C. §2533b(l)(3). |
| 124. |
10 U.S.C. §2533b(l)(4). |
| 125. |
10 U.S.C. §2533b(f). |
| 126. |
10 U.S.C. §2533b(b). |
| 127. |
10 U.S.C. §2533b(c)(1). |
| 128. |
10 U.S.C. §2533b(c)(2). |
| 129. |
10 U.S.C. §2533b(e). |
| 130. |
10 U.S.C. §2533b(k)(1). |
| 131. |
10 U.S.C. §2533b(g). |
| 132. |
10 U.S.C. §2533b(h)(2)-(3). Acquisitions of certain COTS items are, however, excluded from this exception, meaning that they must comply with the specialty metals restrictions. See 10 U.S.C. §2533b(h)(2)(A)-(D). |
| 133. |
10 U.S.C. §2533b(i)(1). This exception does not apply to high performance magnets. 10 U.S.C. §2533b(i)(2). |
| 134. |
10 U.S.C. §2533b(d)(1), (2). |
| 135. |
10 U.S.C. §2533b(j). |
| 136. |
10 U.S.C. §2533b note. |
| 137. |
See 48 C.F.R. §225.7000(b). |
| 138. |
See, e.g., WTO GPA, United States Appendix I, General Notes ("Except as specified otherwise in this Appendix, procurement in terms of U.S. coverage does not include non-contractual agreements or any form of government assistance, including cooperative agreements, grants, loans, equity infusions, guarantees, fiscal incentives, and governmental provision of goods and services to persons or governmental authorities not specifically covered under U.S. annexes to this agreement."). |
| 139. |
23 U.S.C. §313(a). The Federal Highway Administration (FHWA) considers a "manufactured product" to be "any item that must undergo one or more manufacturing processes before the item can be used in a highway project... [and] may be usable as a stand-alone product, or as a component within a more complex assembly which would also be considered a manufactured product." Memorandum from Donald P. Steinke, Chief, Highway Operations Division to Edward V.A. Kussy Acting Chief Counsel, "Buy America Policy Response," December 22, 1997, available at http://www.fhwa.dot.gov/programadmin/contracts/122297.cfm [hereinafter 1997 Buy America Memorandum]. |
| 140. |
48 Fed. Reg. 1946 (Interim Final Rule, Jan. 17, 1983); 48 Fed. Reg. 53099 (Final Rule, Nov. 25, 1983); Memorandum from John R. Baxter, Associate Administrator for Infrastructure to Division Administrators, Directors of Field Services, "Action: Clarification of Manufactured Products under Buy America," December 21, 2012, available at http://www.fhwa.dot.gov/construction/contracts/121221.cfm [hereinafter 2012 Buy America Memorandum]. |
| 141. |
48 Fed. Reg. 53103 (Nov. 25, 1983). |
| 142. |
23 C.F.R. §635.410(b)(3). See also 23 U.S.C. §313(b)(3). |
| 143. |
23 C.F.R. §635.410(b)(4). |
| 144. |
23 U.S.C. §313(d). |
| 145. |
48 Fed. Reg. 1946; 48 Fed. Reg. 53099; see also 1997 Buy America Memorandum, supra note 139; 2012 Buy America Memorandum, supra note 140. |
| 146. |
59 Fed. Reg. 6080 (Feb. 9, 1994). |
| 147. |
60 Fed. Reg. 15478 (March 24, 1995). |
| 148. |
23 U.S.C. §313(b); 23 C.F.R. §635.410(c)(1). |
| 149. |
23 U.S.C. §313(f). Determining the applicability of this prohibition is done in concert with the USTR. Id. |
| 150. |
49 U.S.C. §50101(a). These requirements apply when funds are appropriated under the following provisions of Title 49 of the U.S. Code: §106(k) (salaries, operations, and maintenance of the FAA); §44502(a)(2) (site preparation work associated with acquiring, establishing, or improving an air navigation facility); §44509 (demonstration projects for certain research and development activities); Chapter 471, Subchapter I (excluding §47127) (the Airport Improvement Program); Chapter 481 (excluding §§48102(e), 48107, 48110) (the Airport and Airways Trust Fund). |
| 151. |
49 U.S.C. §50101(b). |
| 152. |
49 U.S.C. §50101(b)(3). This waiver is available for funds expended under 49 U.S.C. §§44502(a)(2), 44509; 49 U.S.C. Chapter 471 Subchapter I (excluding §47127); and Chapter 481 (excluding §§48102(e), 48107, 48110). Id. |
| 153. |
See 49 U.S.C. §50101(b)(3); see, e.g., "Notice of Decision To Issue Buy American Waivers for Foreign Object Debris (FOD) Detection Equipment," 75 Fed. Reg. 81708 (Dec. 28, 2010); "Notice of Waivers To Buy American Under the American Reinvestment and Recovery Act for Grants-in-Aid for Airports," 74 Fed. Reg. 62388 (Nov. 27, 2009). |
| 154. |
74 Fed. Reg. 62388 (Nov. 27, 2009). |
| 155. |
49 U.S.C. §5323(j). |
| 156. |
49 C.F.R. §661.5(c). |
| 157. |
See 61 Fed. Reg. 6300 (Feb. 16, 1996). The FTA has noted that "the definition [of made primarily of steel or iron] refers to construction or building materials made either principally or entirely from either steel or iron. All other manufactured products, even though they may contain some steel or iron elements, would not be covered." Id. |
| 158. |
49 C.F.R. §661.5(d). |
| 159. |
49 U.S.C. §5323(j)(7). However, the FTA will not participate in contracts governed by state or local "Buy America" provisions that are not explicitly established under state law, or state and local "Buy Local" provisions. 49 C.F.R. §661.21(b). |
| 160. |
49 U.S.C. §5323(j)(2). |
| 161. |
Rolling stock is defined as "transit vehicles such as buses, vans, cars, railcars, locomotives, trolley cars and buses, and ferry boats, as well as vehicles used for support services." 49 C.F.R. §661.3. |
| 162. |
See 49 C.F.R. §661.11(g) ("For a component to be of domestic origin, more than 60 percent of the subcomponents of that component, by cost, must be of domestic origin, and the manufacture of the component must take place in the United States."). |
| 163. |
49 U.S.C. §5323(j)(2)(C). |
| 164. |
49 U.S.C. §5323(j)(5). Determining the applicability of this prohibition is done in concert with the USTR. Id. |
| 165. |
49 U.S.C. §24405(a)(11). "For the purposes of [subsection (a)], in calculating the components' costs, labor costs involved in final assembly shall not be included in the calculations." 49 U.S.C. §24405(a)(3). |
| 166. |
49 U.S.C. §24405(a)(1). |
| 167. |
"Notice of Availability of Answers to Frequently Asked Questions Regarding Buy America & FRA's High-Speed Intercity Passenger Rail Program," 75 Fed. Reg. 59322 (Sept. 27, 2010); see also Federal Rail Administration, "Buy America Frequently Asked Questions," available at https://www.fra.dot.gov/eLib/Details/L02740 [hereinafter FRA FAQs]. FRA has not yet promulgated regulations implementing these requirements but has stated its intent to do so. Until then, FRA has published a "Frequently Asked Questions" document to guide grantees. 75 Fed. Reg. 59322 (Sept. 27, 2010). |
| 168. |
FRA FAQs, supra note 167; see 49 C.F.R. §661.5(d). |
| 169. |
49 U.S.C. §24405(a)(8). |
| 170. |
49 U.S.C. §24405(a)(2). |
| 171. |
49 U.S.C. §24405(a)(6). |
| 172. |
Buy American requirements that apply to procurements by the federal government do not restrict Amtrak spending because Amtrak is a for-profit corporation and "not a department, agency, or instrumentality of the United States government." See 49 U.S.C. §24301(a). |
| 173. |
49 U.S.C. §24305(f)(3). |
| 174. |
49 U.S.C. §24305(f)(2). |
| 175. |
The FRA has been delegated authority from the Secretary of Transportation to issue exemptions from these requirements to Amtrak upon request. |
| 176. |
See Letter from Joseph Szabo, Administrator of the Federal Rail Administration, to Jeff Martin, Chief Logistics Officers, Amtrak, "Re: Request for a Buy American Exemption for Acela Power Car Central Block Assemblies," March 7, 2012, available at https://www.fra.dot.gov/eLib/Details/L04370. Amtrak's domestic buying preference statute requires Amtrak to purchase manufactured articles with a value exceeding $1 million dollars that are manufactured in the United States substantially from articles, material, and supplies mined, produced, or manufactured in the United States. "Substantially" has been interpreted by Amtrak and ... FRA ... to mean that the manufactured articles in Amtrak's purchases must have domestic component content greater than fifty percent (by cost). See 48 C.F.R. § 25.003 (domestic end product means "An end product manufactured in the United States, if- (i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components."). Id. |
| 177. |
49 U.S.C. §24305(f)(4)(A). |
| 178. |
49 U.S.C. §24305(f)(4)(B). |
| 179. |
See, e.g., P.L. 111-5, §1605 (prohibiting the use of funds appropriated or otherwise made available by the Recovery Act for a project for the construction, alteration, maintenance, or repair of a public building or work unless "all of the iron, steel, and manufactured goods used in the project are produced in the United States," with certain exceptions). |
| 180. |
This provision is like the Berry Amendment, discussed previously, but applies to purchases by the Department of Homeland Security, not DOD. |
| 181. |
The Buy American Act of 1988, enacted as part of the Trade and Competitiveness Act of 1988, imposed similar restrictions upon the procurements of federal agencies. See generally P.L. 100-418, §7004, 102 Stat. 1551-52 (Aug. 23, 1988) However, these restrictions were temporary and expired on April 30, 1996. |